1. Equipment Model and Name GBW-60B Computer Control Cupping Testing Machine 2. Equipment Introduction The machine adopts mechanical and electrical integration design, and it has concise and elegant appearance, it is the precise device used to test manufacturability of metal thin sheet and banded material, according to GB/T 4156-2007<Metal materials, thin sheet and bande...
1.Overview The GW-60.3B steel pipe bending tester complies with the 6.5.2 and 6.8.1.5 of the longitudinal electric welded steel pipe GB/T13793-2008; the welded steel pipe for low-pressure fluid transportation GB/T 3091-2001 on the steel pipe bending test in 5.5.1; It also complies with the relevant requirements of the metal pipe bending test method GB/T244-2020, and is a...
1.It can be used to assess lubricant, metal, plastic, coating, rubber, ceramics and other materials friction and wear. Not only can satisfy traditional petrochemical industry user research, development, testing a variety of highgrade series of hydraulic oil, engine oil, gear oil demand, can also satisfy the new materials, new technology research development of user simul...
The test bench was developed based on the technical parameter requirements in GB / T225-2006 Steel-Hardenability test by end quenching. The shape is beautiful and generous. The whole machine frame is formed by bending and welding of stainless steel plates. The water tank is independently welded and formed in the frame. It has cooling and heating functions to ensure const...
The machine is mainly used for determination circular cross section stiffness of plastic and composite pipe, equip with a special ring stiffness deformation measuring device, so that the deformation measurement results is more accurate. It is the ideal test and measuring instrument for municipal, quality inspection, chemical and plastic pipe production enterprises.
This machine is produced to aim at processing various kinds of physical and chemical indexes performance testing of man-made panel and facing man-made panel. It can process measuring test for surface bonding strength, static bending strength and elastic module, screw holding capability, internal combinative strength and so on, which can also process necessary tensile, co...
The device is automatically loaded by the cycloid reducer, imported linear guide, the entire English interface, computer-controlled high-strength bolts automatically tighten, relax, reset, intelligent process running tips, easy and fast operation. When the axial force reaches the standard set value, the detector will automatically record the test data, the computer auto...
Steel Strand Testing Machine dedicated to the mechanical properties of the steel strand test, the machine is equipped with Lenovo computer, HP printer, large gauge electronic extensometer, photoelectric encoder and a full-featured universal test software, can easily complete the test function; comes with a strand dedicated lengthened jaws to ensure that the sample break ...
Mainly used for room temperature (high) endurance test of metal, nonmetal, composite materials and components. It's the commonly used equipment for material property test in metallurgical department, research institutions, quality inspection department, aerospace department, vehicle manufacturing, mechanical manufacturing, petroleum chemical industry, building materials,...
This stone wear tester according to the national standard of natural granite, marble and other building decoration materials (such as man-made stone, microcrystalline glass, etc.) on abrasion resistance or wear-resisting degree testing special designated equipment. The test machine has a beautiful shape, low noise, working head count (sample holder) and more features.
1. Introduction MCD-6 Pad friction coefficient testing machine is mainly used for testing wire rope and pad friction coefficient, which is LIANGONG professional research and development to test the wire rope on the friction pad in a variety of environments wear performance and display defects. This machine uses the computer graphics tracking control system, real-time dis...
1.Name and type of equipment Computer Control Man-made Panel Universal Testing Machine CMT-10B 2. Usage and Characteristics This machine is produced to aim at processing various kinds of physical and chemical indexes performance testing of man-made panel and facing man-made panel. It can process measuring test for surface bonding strength, static bending strength and el...
Six series of samples can be made at the same time, ranging from 10-25 pieces per series according to the sample size, with a maximum load of 6kN. After adding the high temperature permanent load longitudinal shear test performance test tool according to the actual needs of customers, the high temperature permanent load longitudinal shear test of the thermal insulation p...
The tester is according with the standard of United States ASTM-G65<Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus>, also according with the standard of JBT_7705-1995<the methods of loosing abrasive particle, abrasive material abrasion test and rubber wheel>. The principle of tester: the silica sand along with the metal sand mouth t...
Application: Sponge special test to meet the tensile and compression test of non-metallic materials; and tensile strength, tear strength, elongation measurement function of cotton test piece; “static deflection, indentation hardness index, indentation hardness characteristics, indentation hardness test, damping and resilience, headrest stiffness, headrest depression, etc...
The notch milling machine produces V-shaped notches in polyolefin pipes in accordance with ISO 13479. The notched pipes are then subjected to a pressure test. 1.1 Simple and safe operation (1) convenient operation and clear visualization via integrated touch display. (2) fixation of the test sample with power-driven holder and torque-limiting friction coupling. 1.2 Rel...
Jinan Liangong Testing Technology Co., Ltd. is a national high-tech enterprise specializing in the research, development, production, sales and service of metal and non-metallic material testing equipment. With the cultivation and support of the local government, with outstanding technological innovation and independent research and development capabilities, and good ent...
MLW-6 slurry abrasion tester is free abrasive wear testing machine, which is according to ISO 15527 <Plastics. Compression-moulded sheets of polyethylene (PEUHMW, PE-HD). Requirements and test methods>. It uses motor rotating sample drive ore sand, dinas, aluminium oxide mixed with water and wear on various metal or nonmetal material. In the spinning process of sample, ...
The frame has high rigidity and small deformation, and meets the requirements for testing of road and railway bridge plates type, pot type and spherical bearings. The test space is steplessly adjustable to facilitate test requirements at different heights. It adopts independent research and development and proprietary multi-channel closed-loop coordinated loading electro...
The test machine meets the requirements of the ASTM G105 wet sand rubber wheel abrasion test method standard. The principle of the machine is that it uses the rubber wheel rotating clockwise to drive the abrasive materials such as quartz sand (mine sand, sand) to wear on various metal or non-metal materials, so as to test the wear resistance of the material. Since the ...
First, Overview This equipment is designed and manufactured in accordance with the requirements of 7.6.3 drainage flow in the GB/T27710-2020 "Floor Drain" standard for single-hole floor drain flow testing equipment. It is widely used in the construction industry, home decoration, and overall bathroom floor drain detection. Second, Applicable standards GB/T127710-2020 "F...
It can complete 4 geogrid materials creep test at the same time. This testing machine implements standard requirements of GB/T17689-1999 "Geosynthetics Plastic Geogrid", QB/T2854-2007 "Plastic Geogrid Creep Test and Evaluation Method", Q/CR549.2-2016 "Railway Engineering Geosynthetics The second part: Geogrid", ISO13431: Geotextiles and geotextile-related products-Dete...
Its main technical parameters meet GB/T 1499.2,GB/T28900,YB/T5126 and satisfy the requirement of ISO10065 about cold bend tests and plane rebend tests. It is the ideal testing equipment which is used for testing bend or rebend performance of steel bars for steel industries and building units
There are two measuring methods: constant speed loading method and constant speed stretching method. Main test indicators: tensile strength, tensile index, elongation at break, tensile energy absorption, elastic modulus, etc. It is recommended to use the LianGong CMT-2L single-column electronic universal testing machine (tensile testing machine), equipped with broadban...
It is generally divided into single corrugated cardboard, double corrugated cardboard, and triple corrugated cardboard. According to the corrugated size, it is divided into: A, B , C, E, F five types. As a packaging material, corrugated paper has the advantages of low cost, light weight, easy processing, high strength, excellent printing adaptability, and convenient stor...
The function of the pendulum impact tester is to measure the impact resistance of metal or non-metallic materials under dynamic load, so as to judge the properties of the material under dynamic load. According to the different experimental materials and standards, the pendulum impact testing machine is divided into Charpy impact testing machine, Izod impact testing machi...
The high temperature test electric furnace adopts the cylinder split type structure, which is composed of the test electric furnace and the temperature controller. The temperature controller adopts PID fuzzy control mode, with small test temperature overshoot, and high control accuracy. It is the high-performance material test equipment for colleges, scientific research...
The JL-3000 Drop Hammer Ball Stud Bending Impact Test Machine developed and manufactured by Liangong is suitable for the ball stud shaft impact bending test in the global industry standard of the automobile industry. It is composed of frame part, lifting system, hammer body, single row ball stud mounting support, safety protection system and control system.
Liangong high-quality large-diameter GW-50G steel pipe bending test machine. The whole machine adopts a four-column structure with high rigidity and stable structure. It is a special equipment for technological bending test on steel pipes.
The JL-3000 drop weight impact test machine is a test machine developed and manufactured to meet GB6803-2008 "Ferritic steel without plastic transition temperature drop weight test method", ASTM E208 "Standard Test Method for Conducting Drop-Weight Test to Determine" Nil-Ductility Transition Temperature of Ferritic Steels "and other standard drop-weight impact testing ma...
The UELONG series of electronic extensometers have the characteristics of high precision, high sensitivity, good stability, and ease of use. They can be used for static and dynamic mechanical performance tests of metallic and non-metallic materials. Measurable material's elastic modulus E, specified plastic elongation strength RP, specified total elongation strength Rt, ...
Tension Parallel to Grain Test 1. One test method of determining the tension-parallel-to-grain strength of wood is given in the following procedure. 2. Size of Specimens The tension-parallel-to-grain tests shall be made on specimens of the size and shape in accordance with Fig.29. The specimen shall be so oriented that the direction of the annual rings at the critical...
Cleavage Test 1. Size of Specimens The cleavage tests shall be made on specimens of the form and size in accordance with Fig. 25. The actual width and length at minimum section shall be measured. 2. Procedure The specimens shall be held during test in grips as shown in Figs. 26 and 27. Observe the maximum load only. 3. Speed of Testing The load shall be applied con...
Shear Parallel to Grain 1.This section describes one method of making the shear-parallel-to-grain test that has been extensively used and found satisfactory. 2.Size of Specimens-The shear-parallel-to-grain tests shall be made on a 2 by 2 by 2-1/2 in. (50 by 50 by 63 mm) specimens notched in accordance with Fig. 21 to produce failure on a 2 by 2 in. (50 by 50 mm) surfac...
Summary of Test Methods 1. The mechanical tests are static bending, compression parallel to grain, impact bending toughness, compression perpendicular to grain, hardness, shear parallel to grain, cleavage, tension parallel to grain, tension-perpendicular to-grain, and nail-withdrawal tests. These tests may be made on both green and air-dry material as specified in these...
MLW-6 slurry abrasion tester is free abrasive wear testing machine, which is according to ISO 15527 <Plastics. Compression-moulded sheets of polyethylene (PEUHMW, PE-HD). Requirements and test methods>. It uses motor rotating sample drive ore sand, dinas, aluminium oxide mixed with water and wear on various metal or nonmetal material. In the spinning process of sample, Q...
