Customized single column hydraulic press

The customized single-column hydraulic press, model PCL 100 A, was created for the molding and deformation of sheet metal and metal components.

The customized single-column hydraulic press, model PCL 100 A, was created for the molding and deformation of sheet metal and metal components.

This electro-hydraulic press develops a pressing power of 100 tons and is characterized by a lowered work table, which is located at a height of only 550mm instead of 800mm as in the standard version.

Furthermore, the dimensions of the lower platform have also been increased and measure 900 x 800mm, while the distance between the boards is 600mm.

The wide throat of the 450mm frame recess allows you to position large metal pieces.

This custom single-column hydraulic press operates through the simultaneous use of dual buttons placed on a movable pedestal.

The hydraulic cylinder rises automatically at the end of each pressing cycle and its stroke is regulated by microswitches.

The descent speed of the piston is 25 mm/sec, while the working speed is 4 mm/sec.

The machine is also equipped with a pressure switch for maximum adjustment of the working pressure.

The working area is protected by fixed metal mesh and the 4 kW hydraulic power unit is located at the back of the press.