5A 250V, with axial lead 5×20mm time-Lag glass body cartridge fuse designed to IEC specification. Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits
1A 250V, with axial lead Standards: UL 248-1, UL 248-14 Slo-Blo, glass body fuse in a compact package. This space saving fuse is ideally suited for lighting, power supply, and adapter applications.
8A 250V 5×20mm time-Lag glass body cartridge fuse designed to IEC specification. Used as supplementary protection in appliance or utilization equipment to provide individual protection for components or internal circuits.
Features/Benefits - 10x85 mm size - Rated Current:1-35A - Rated Vlotage: 1500V DC - UL & TUV Approval - 30,000 A interrupting rating Applications - Inverters - Combiner boxes
3.15A, 250V 5×20mm Time-Lag surge withstand ceramic body cartridge fuse designed to IEC specification
- DC surge protective devicespecially used for photovoltaic system less than 1000vdc. -The core parts are metal oxide vristor components with high discharge capacity. -With Reliable control thanks to Thermo Dynamic Control disconnector. -Without remote signaling contact for control device. -Fault indication via red mark in the inspection window.
The SCM3425ASA bus input voltage range is -42VDC to +42VDC and it features high electromagnetic immunity, low electromagnetic emissions, bus pins protected against transients, over-temperature protection, and support CANFD.
Machine and Human Safety in Difficult Conditions Limit switches are preferred for machine and human safety in many applications. We have products with different features. The most important feature of KBT NSR66 series limit switch products compared to their competitors is produced in a way that they can operate under the most difficult conditions. The most important fe...
Any electronic device generates some amount of electromagnetic radiation. LCD display is the obvious place to show EMI.
During Chinese Shopping Festival(01 to 11 Nov.),DWIN sorted out annual hot selling products which in stock now for T5L product line for new and old clients, and released dozens of new products at the same time, welcome to contact with us for purchasing ! The special price as picture shows is acceptable even for one piece purchasing!
COF SMART LCM Based on T5L0 ASIC Is Coming Aiming at the end user's pursuit of high cost performance and visual beauty, DWIN has announced F series SMART LCM, which adopts COF structure. Note: COF is Chip on Flexible Printed Circuit. The COF SMART LCM is an innovative product that designs the driving circuit on the LCD module cable and eliminates the traditional PCBA mo...
A lightning strike is one of nature’s most destructive events. Early Streamer Emission (ESE) lightning arrester is one of the main tools in lightning protection systems (LPS), a major innovation over passive lightning rods or Franklin rods. Starting with its installation and requirements to functioning, these are the five most frequently answered questions about ESE in A...
CENO has been devoted to providing high quality solutions and units for various intelligent automation fields.The ECN series are through hole slip rings,the inner hole can pass through the drive shaft,gas-liquid passage,it can also integrate high frequency,fiber optic,encoder,waveguide,gas other joints.Use advanced fiber brush ensures reliable contact under extremely low...
SANYO DENKI EUROPE SA. is pleased to introduce its new San Ace 136RF 9RFA type Reversible Flow Fan, ø136 × 28 mm, that has the highest airflow and static pressure in the industry. This fan is ideal for home ventilation systems and other applications that require two-way blowing fans. FEATURES 1. High Airflow and High Static Pressure This fan delivers a maximum airflow...
FCN series is a family of fiber optic rotary joints manufactured by CENO.Such rotary unions feature optic fiber as the media for data transmission.FCN0231G-38 is a multi-channel fiber optical slip ring,which can contain 2 to 31 channels fiber optical.we can choose single mode or multi mode fiber or single mode and multi mode mixed use.It has good optical performance and...
Fiber optic rotary joint,also known as fiber optic slip ring,fiber optic rotary connector,optical hinges,etc.This slip ring adopts optical fiber as media for transmitting data,provide the best technical solution for elements of system to transmit data when rotating.It is especially suitable for equipments that require unlimited, continuous or intermittent rotation and tr...
Aside from standard enclosures, a variety of customization services are also available. CNC milling, inkjet printing, and overlay sheet manufacturing, are but a part of what we are able to provide as value-added services to you.
This is a solid bore through bore slip ring,CENO ECN series through bore slip rings can be customized according to customer’s demand,the center hole is available from 0 to 980mm,it’s can pass through the drive shaft,gas-liquid passage,also can integrate high frequency,fiber,encoder,wave guide,gas and liquid and other joints.ECN000-11P-36S with waterproof grade IP65,it’s ...
RCN0118NB is a RF coaxial rotary joint,also named high frequency rotary joint,wave guide rotary joint.The channel coaxial rotary joint is conducive to reducing the size of the structure and processing,conducive to stable rotation.It meets the microwave transmission in a wide frequency band with excellent performance indicators,including the rotating section and the fixed...
A through hole slip ring can be used in any electromechanical system that requires unrestrained.Slip ring is also called a rotary electrical joint,collector,commutator or swivel,slip ring can improve system performance by simplifying operation and eliminating damage prone wires.ECN030-05P provides an economical,readily available solution when a compact through bore confi...
High speed slip ring is a product specially developed to meet high speed serial digital signal or analog signal transmission.CENO high speed slip rings are demand very high accurate tolerances of the rotors, bearing space,high request of the concentricity of the rotors with other related parts.This series of products support high frequency signal transmission,and also su...
B0505ST16-W5 is a high-isolated and high-voltage DC-DC converter. It meets the isolation protection requirements of 2 MOPP and features an isolation voltage of 5000VAC, system operating voltage up to 849VDC, isolation capacitance as low as 3.5pF, and complies with IEC/EN 60601 standard. Its working temperature range is as wide as -55℃ to +125℃, making it work stably in d...
CENO large size slip rings mean with large hole size,the center hole is available from 0 to 980mm,can be customized according to customer’s requirements.ECN130-19P-06S with inner bore size 130mm,outer diameter 220mm.The contact materials is precious metal,it’s can make sure the transmission performance more stable and lifetime more longer.This kind of large size slip ri...
MW1330 silp rings, 3wires * 30Amp slip ring,manufactured by MOFLON. OD 45mm* Length 65mm, 3Wires * 30A MW1330 slip rings are small and compact with OD 45.00mm * L 65mm, standard, off-the-shelf.Color-coded lead wires are used on both the stator and rotor for simplified electrical connections. Using Carbon brush design for each ring.
Customized outdoor UPS 1KVA 800W 36VDC with built-in lead-acid batteries 12V 9Ah 3 pieces. The UPS cabinet is designed with the protection level of IP55 and with the ventilation system. It can be working well in the environment temperature range of 0-45 celsius. The system can provide uninterrupted backup power 90 minutes minimum at the load of 200W after a full charge.
MORNSUN offers more choice to users. TD(H)541S485S-F can be used for both half-duplex and full-duplex communications, providing customers with flexible design options. The new full-duplex RS485/422 series can be used in industrial automation, building automation, smart meters, photovoltaic inverters, motor drive, etc.
Ingiant HD-SDI Slip Ring Advantages 1.Especially made for rotating transmission of 1080P/4K high-definition video signals; 2.Can be combined transfer with power/electrical signals, or gas/liquid; 3.The slip ring can transmit uncompressed high quality video signals with max. 1.485GHz(through hole type) to 3GHz(solid inner type); 4.Made with advanced fiber brush technology...
Georg Schlegel GmbH & Co. KG is now also offering a further version of its active illuminated emergency-stops. The new type QRBDUV is equipped with an anti-lock collar and a diagnostic unit which further enhance the safety at work in producing enterprises. The functional principle: If the plant part which is equipped with the fix mounted emergency-stop – for example as a...
Lightning is one of nature’s most destructive events, so it is essential to protect people, the environment and infrastructures from its effects, as well as guaranteeing the continuity of services and safeguarding material and cultural assets. The purpose of a lightning protection system is to capture lightning, conduct its current safely to earth, dissipate in the groun...
As a more than 15 years experienced customized slip ring manufacturer, Ingiant knows the slip ring technology history very well. Today we would like to introduce the 3 generations of slip ring technology to our valued customers. 1. First generation is carbon brush slip ring, the advantage and shortcoming is as below: Carbon brush slip ring Advantage: Cost effective...
PREVENT EQUIPMENT FAILURE BEFORE IT OCCURS Unplanned downtime is a serious threat looming over every company that relies on functioning equipment to get work done. It is costly and frustrating to say the least, but what if you could reduce the risk of downtime caused from damaged electrical components by simply adding some additional protection? Don't assume that just b...
The ECN series electrical through bore slip ring is a rotating assembly used to transfer power, signal, control circuits or data (analog / digital) from stationary inlets to rotating outlets.CENO ECN series slip rings feature 25.4mm ,38.1mm,50mm,60mm,70mm,80mm inner bore size etc,. It’s also can customized according to customer’s demands ,the inner bore size can be custo...
ECN070-11P-06S with through bore size 70 mm, it can combine with power.signal.Ethernet, USB, Control Net.CANBUS. PROFIBUS. It could also be mounted by shaft or optional flange mounting.The ECN series electrical slip rings feature a low torque design with precious metal contacts and offer low electrical noise. Includes flexible, color-coded lead wires suitable for transf...
The REBT regulation, completely approved in 2002 and partially modified since then, is the most important requirement for calculating electrical installations in Spain. It concerns every installation, either if it is a new conception, or if an existing one is modified. The full text of this regulation is mandatory, as well as other UNE and IEC standards mentioned in it. ...
The VDE 0100 series of standards for low-voltage installations is the most important frame of reference for the electrical installation industry in Germany and Luxembourg. It concerns the installation of new electrical installations as well as modifications and extensions to existing electrical installations.
The Low Voltage Installation Standard (NIBT) is the most important standard for the electrical installation industry in Switzerland. The calculation methods used in elec calc™ are based on the requirements for the safety of persons and property as defined in the NIBT 2020 standard.
