To meet customer needs, Jiwei has launched a new product with suspension cable. As an advanced product, with flexible suspension cable Jiwei innovatively solves the bending and damaging problems of the extension version of traditional Vibrating Rod Level Switch. With the suspension cable, the Vibrating Rod Level Switch can be applied in tall and narrow silos, even in osc...
GMT-H2 is a brand new harsh mount weighing indicator for weight transmitting on the industrial site. It has the superior appearance, stable performance, and it is easy to operate. GMT-H2 can be widely used in lithium batteries, chemical, feed, concrete mixing, and other industrial automation fields for silo weighing, platform weighing, weight checking, loss-in-weight, li...
ADTEK CPM-80 Series is our most advanced Multifunction Power Analyzer. The CPM-80 Series meter is designed to address power quality issues and identify the causes that lead to power anomalies thus helping to achieve higher levels of energy efficiency.
With both the environment and the economy in mind, manufacturers are rapidly changing their packaging: Thickness reduction Use of consumer refills: doypacks, flexible pouches, Introducing new bio-based materials Manufacturers need simple, effective, affordable control systems that are adapted to production environments. Regulatory packaging instructions ADR P620 and I...
Mushrooms cannot photosynthesize and only consume oxygen, so they are most abundant in forested deciduous areas. The type and quantity of mushrooms are also inextricably linked to the oxygen content of the area. (Edible mushroom) mushroom consumes a lot of oxygen and metabolizes carbon dioxide in the process of growth. High carbon dioxide in mushroom sheds is caused by ...
The oil and gas industry is the largest industrial source of methane emissions in the United States, responsible for approximately one-third of total U.S. methane emissions. The Environmental Protection Agency (EPA) has implemented regulations under the Clean Air Act to help reduce methane emissions from oil and gas industry. In light of these regulations, it is essenti...
The U.S. Methane Emissions Reduction Action Plan lays down more strictly regulation about CH4 emission in oil and gas industry, which accelerates CH4 monitoring technology innovation. Aiming at continuous emission monitoring, Cubic TDLAS CH4 sensor Gasboard-2502 has achieved a minimum detection limit of 1ppm and a high resolution of 0.1ppm to fulfil accurate minor leakag...
・Two-Wire 4-20mA Two-wire system, as the name suggests, the signal transmission and power supply of the instrument together with two wires to complete, these two wires are both the power line and the signal transmission line. Advantage: only two wires, compared with three-wire and four-wire system, in the wiring distance is very long, can reduce more than 1/3 of...
The smallest sensor in the AXIS-MI-10/104 laser sensor series has a size of only 3.5 x 3.7 cm and provides reliable results in the tightest spaces with a measuring range of up to 104 mm. With its high-precision point beam shape, this laser sensor series is particularly suitable for the pinpoint measurement of the smallest components or cracks. AXIS-MI-50/300/500 series ...
01: Ex/Explosion Why explosion protection? Explosive Substances : Many production sites produce certain combustible substances. About two-thirds of underground coal mines have explosive substances; in the chemical industry, more than 80% of the production plant area has explosive substances. Oxygen: Oxygen in the air is everywhere. Ignition source: In the production pr...
Fiberscope.net, one of the leading suppliers of inspection solutions, has unveiled the latest upgrade for its TROGLOTREK Pipe Inspection Crawler, the most versatile battery-operated robot in the market. The new motorized camera riser expands the device's capabilities, setting a new industry standard for versatility. This breakthrough advancement positions it as the only ...
Together with the local partner INTAI INGENIERIA S.A.S. several on-site tests were carried out and a non-contact solution was preferred. Chemical and disinfectant substances require chemical resistance and a robust design. Accurate and fast level measurement The manufacturer of various dairy products needed a reliable solution to control medium solid waste from the plan...
The challenge was to find a dust-resistant measuring technology that would measure reliably under very high ambient temperatures. A suitable solution for continuous level measurement was configured with the non-contact radar sensor from UWT. The highlight was the integrated air purge connection, which enabled regular, cyclical cleaning and cooling of the lens antenna. A...
According to a recent World Fab Forecast issued by Semiconductor Equipment Manufacturers International (SEMI), more than 50% of semiconductor yield losses can be attributed to micro-contamination. For minimizing yield losses, it is essential for semiconductor fabrication plants (semiconductor fabs) to adopt rigorous contamination control strategies in the cleanrooms. Pa...
The top 5 reasons why testing the integrity of butt-welded and overlap joints in industries such as plastics and rubber, petrochemical, geomembrane and pipeline construction is so crucial: 1. Safety: Many of these industries deal with hazardous materials like chemicals, gases, and liquids. A faulty joint could lead to leaks, spills, or even explosions, posing a signific...
The SFS Flow Module is primarily used in gas supply, gas dosing systems, analyzers and manifolds, but is also suitable for process control, e.g. in modified atmosphere conditions for the measurement of low flow rates. This makes this flow module ideally suited for integration in medical devices. In environmental technology the SFS module can be used in measuring instrume...
The new series from Angst+Pfister Sensors and Power is compact and thus ideal for direct integration into a product – e.g. in medical technology devices. Internally, the sensor is built on a MEMS chip that works according to the calorimetric principle. In addition to the flow, the direction of flow can also be detected. The sensor is calibrated with air as standard. On r...
Thanks to EHEDG and 3-A certification, the pressure switch is also suitable for industries with high hygienic requirements. Due to an accuracy of < ±0.5 % and minimal long-term drift, it permanently ensures an accurate representation of the process pressure for more than 100 million load cycles. The pressure switch is available with a digital output signal as well as a ...
It is the first transducer to use the SDP 5003.2080 and offers maximum security of investment. Due to minimal signal noise, the sensor provides precise measured values in the long term. Thanks to active temperature compensation, even with high temperature fluctuations. The measured values can be viewed on the display. Thanks to EtherCAT®, the model WUD-2x-E does not h...
Even under demanding conditions, the sensor delivers constant, precise measured data and ensures high operational safety. The special feature of the MH-4-CAN is, as the name suggests, the CANopen or SAE J1939 serial interface. This enables use in complex machines and offers the advantage of simple and cost-effective system expansion with the bridging of large distances w...
The battery-operated CPG1200 has been designed specifically for use in mobile applications. Thanks to the durable plastic case and optional protective case cap, the instrument is robust and easily withstands vibrations and shocks in use. The proven measurement technology covers all common ranges up to -1 ... 1,000 bar [-14.5 … 15,000 psi] (gauge pressure) with an accura...
Easy to integrate into mechanical engineering applications, the new cube ultrasonic sensors from microsonic are characterised by their flexibility and versatility. The rotatable sensor head of the sensors permit their alignment in five radiation directions and enable ideal adaptation to different applications and installation conditions. Its QuickLock mounting bracket en...
ION Science Unveils the NEW Titan 2 benzene monitor, but what is the difference between the new instrument and its predecessor? In this comparative article, we delve into the differences between Titan 1 and Titan 2 and explore the upgraded features, including the increased sensitivity, implemented to comply with the upcoming benzene exposure limit changes. Titan 1 vs Ti...
Oxygen has many properties. It is vital to sustain life, essential for the environment, supports combustion and acts as a catalyst in many industrial and biological reactions and processes. Yet, when it comes to processing and transporting natural gas, oxygen is considered to be an unwanted and potentially dangerous contaminant. Oxygen can enter the natural gas train...
When companies develop new devices, they must ensure there are no failures in the field. This means that thorough reliability burn-in testing must take place from the start to avoid malfunctions down the road.
Rainwater harvesting refers to rainwater collecting and storing for later use, and it makes sense nowadays especially in drought-prone areas. As we may know the climate change is worse and worse, and water resources become scarcer, rainwater collecting is becoming vital for conserving water and reducing the impact of drought. To overcome the problem, we must place more f...
ION Science Introduces Titan 2: The Ultimate Benzene Monitor with Unmatched Sensitivity and Stability ION Science Unveils Titan 2: The Next Generation Fixed Benzene-Specific Monitor for Unrivalled Safety and Compliance ION Science has launched a new, dramatically upgraded version of Titan, maintaining its position as the only fixed benzene-specific monitor in the world;...
▶ INTRODUCTION MCA416L is a low-power MODBUS output single-axis inclinometer developed by RION Technology for the industrial on-site control. it adopts the latest anti-interference platform design, integrates a new type of micro-mechanical sensing unit, wide temperature working performance, superior anti-vibration performance, and long-term stability. Reliable, effective...
Customer’s Inquiry A R&D technical director from Italian would like to inquire for a pressure transmitter for natural gas distribution. Common technical specs for the transmitter include: 1)4-20mA output 2 wires 2)½’’ gas process connection 3)Accuracy is max±0.25% URL for ranges below 1Bar, max ±0.1% URL for ranges equal or above 1Bar 4)ATEX certification 5)Mini H...
Carbon monoxide CO is the main occupational disease hazard factor in metallurgical iron and steel enterprises, with many workplaces, wide distribution range, and wide contact with the crowd. The content of carbon monoxide in the gas is about 30%, and carbon monoxide poisoning may occur in the posts exposed to the gas if no attention is paid to the protection.
Brake force inspection is a key component of vehicle maintenance. Several million brake force inspections are performed every year in Germany. These inspections are carried out in workshops, as well as at testing organisations and test centres, to ensure that vehicles meet the legal requirements and that the safety of all road users is guaranteed. The economic significan...
The latest model of the Cygnus Underwater, an incredible advance on its predecessor, has a host of smart new features, specially designed to operate seamlessly in severe, hostile conditions, simultaneously accomplishing greater accuracy and usability. Measuring through coatings, and now, heavy corrosion The most noticeable update (aside from a fantastic new look!) ¬is...
They are applicable in various fields such as HVAC, environmental monitoring, industrial processes, and water treatment. For example, they can be used in cleanrooms to ensure that the indoor pressure is higher than the outdoor pressure, preventing contamination from outdoor particulate matter. They can also be used to measure the amount of industrial exhaust in pipelines...
ION Science manufactures an extensive range of technologically advanced gas and leak detectors for a wide variety of gases. View our ever-growing portfolio to find the optimal solution for your gas detection needs.
The compact confocalDT IFD2410 and IFD2415 sensors represent a new generation of confocal sensors. These compact sensor systems have an integrated controller, which significantly simplifies installation. Several measuring ranges and accuracy classes open up a wide range of measurement tasks, e.g., for series use in coordinate measuring machines, for inline thickness moni...
From fleet operators to construction companies, organizations need reliable and innovative solutions to monitor and control their fuel usage effectively. One such game-changing solution is the PIUSI BSmart system.
