• band 20kHz – 50kHz for sonication signal level; • band 400kHz – 1.2MHz for cavitation level. Broadbands allow for a large variety of applications. The high selectivity with channels high gain (up to 61 dB) allows to work with a wide range of input signal. Lightweight, compact design and battery power make it to be portable, easy to use meter of the ultrasonic wav...
AMETEK Land, the leading industrial infrared non-contact temperature measurement specialist, has announced that buyers of its Cyclops C100L will receive a designated three point UKAS certification to ISO / IEC 17025:2005 as standard.
PEWATRON launched the new analog A2 series of gauge pressure sensors. The A series is compatible in footprint and pin configuration with the highly successful F and X series, but with higher total accuracy (typically +/-1.0%, max +/-1.5%) and a wider compensated temperature range (0-85°C). The analog A2 series is a two-chip system consisting of a MEMS sensor chip and an...
ORION is a rugged, powerful and easy-to-use vibration monitoring terminal. It offers unrivaled features, including built-in sensors, a 3G modem, Wi-Fi and GPS. It is watertight and can be mounted horizontally or vertically. This unique feature set enables a different approach to vibration monitoring. “01dB rounds off its product line (DUO, FUSION, CUBE), adding a gro...
ROLAND ELECTRONIC offers for this purpose the Eddy Current Detection System UFD40, which is especially designed for the usage at wire drawing lines, cable rewinding lines and tube coating lines. UFD40 is now available with the modular coil system SH-EC-15, to meet the increasing quality requirements of the industry. The UFD40 with the new coil is ideally suited...
ATEQ, the world’s number one TPMS tool manufacturer, will trigger a new wave in TPMS tools at this year’s Reifen Essen trade show in May. Not only will the full line-up of ATEQ’s industrial and aftermarket tools be presented, but also - for the first time - the VT36, will be showcased. The ATEQ VT36 is affordable, making the tool accessible to small and medium size g...
● Cooperation with devices equipped with port: ◦ RS485 with Modbus RTU protocol and ◦ Ethernet with Modbus TCP protocol. ● Visualization of data record with saving in the database. ● Support for many of data formats i.a.: integer, float, long, double. ● Visualization in graph or table. ● Export data to CSV file. ● Network version - access to database from many PC....
The FLIR SC7000 Series is specifically designed for academic and industrial research applications that require a flexible thermal imaging camera with high sensitivity, accuracy, spatial resolution, and speed at an affordable cost. Designed to address any application in single and multispectral analysis, FLIR SC7000 Series cameras offer researchers a choice between mid...
The A4300 VA3 Pro is the newest addition to Adash range of portable devices for vibration diagnostics. The expert system developed by Adash can automatically detect machine faults such as unbalance, looseness, misalignment and bearing faults. There is a non-contact IR temperature sensor (for immediate bearing temperature measurement) and a LED stroboscope/torch. The A430...
1. The RH802, manufactured by ROZH, is a portable vibration spectrum analyzer that offers long time domain waveform, cross-phase measurement, coast-up/down testing characteristics analysis and on site dynamic balance measurement. 2. It features a 3.5 inches TFT large LCD screen, simple flow chart, compact and light weight, more convenient operation. 3.Furthermore, i...
1. RH103T accelerometer has a built-in IEPE circuit, isolation output, and a constant current supply, integrated with temperature measuring function. 2. It is laser seal-welded. 3. A military connector can be used for on-site industrial purposes and on-line monitoring in hazardous environment. Index 1. Acceleration arrange: +/-80g 2. Sensitivity (+/-10%): 100mVg...
1. RH503 it is a wireless sensor can be used for sensing temperature signal and vibration signal. 2. convenient maintenance for cable wiring,reduce the workload on sites and monitoring the equipments. 3. designed for low consumption 4. of standard configurations and lead to continuous workforce. Index: 1. Signal transmission:Zigbee 2. Transmission distance o...
GEB Enterprise is making available the firsts mini PCIE board I/O board that hosts the PCiem-Fifo&Pio system, it hosts both low and high speed bidirectional I/O thought for electro-medical applications. The programmability of the fpga system allow to control the I/O pins by: -Two programmable -A 32 bits input fifo that can be splitted in 2x16 bits -A 32 bits output f...
1. It has combined 30:1 infrared temperature detector, vibration measurement and manual input operation. 2. It has huge LCD true color display and it has small volume/. 3.It is also very light weight and it is more convenient for single hand application. 4.The protection class is IP54 and it can resist dirt and water and it is good for several industrial sectors. ...
Makersan, innovative manufacturer of sensors, engine throttle and motion controllers, widens its product range, using latest technology sensors manufactured at his integrated factory in Turkey, with inclination and acceleration sensors with embedded gyro. Our new sensor uses 6D IMU, while most of the manufacturers use 2D or 3D IMU. The influence of vibration due to ho...
Bandwidth 50 kHz / Resistant up to 200 °C The piezoresistive pressure transducers Series M5 are ideal, thanks to the M5 fine thread, for taking measurements at close proximity in places where access is a problem and in very thin pipes – exactly the kinds of conditions associated with engine test benches. The front-flush design prevents gas bubbles interfering with fluid...
It delivers two measurement signals, one static pressure signal and one for calculating the air flow rate. The air flow rate is calculated by the instrument (DIALOG, LT3, CL88, etc.) according to the Bernoulli equation. For ease of maintenance on site, the AT50 is equipped with drain cocks for blowing through all internal pipes.
to see the machine condition at a glance. Quick, easy to use, with automatic auto diagnosis system for beginners and experts. The VSHOOTER VBS1T is much more than a innovation in the field of the vibrometers, it is a totally new concept, a new way to do vibration monitoring and analysis. This new modern concept consists of creating automatically Machine Condition Picture...
200 °C / 200…1000 bar 7 LI series OEM pressure transducers, ø 15 mm, are designed for high-pressure and hightemperature applications. Robust and corrosion-resistant A high-sensitivity piezoresistive silicon chip is built in as the pressure-sensing element. Pressure is transmitted via an oil filling. The upstream separating diaphragm completely isolates the pressure ch...
• Maximum allowable pressure up to 45 bar / test pressure up to 50 bar • Standard factory settings from stock in small volumes • High and low pressure switches • High temperature version with snubber for direct compressor mounting (range 6) • Direct mounting reduces the number of joints and thus avoiding potential leakage • Precise setting and repeatability • IP 65 prote...
It is made of stainless steel and is compact, and sealed under prolonged immersion (IP 68). The measurement principle on which the ASL load cell is based is the deformation of beams subjected to a compression force. It uses strain gauges arranged to form a Wheatstone bridge for conversion of a force into an electrical signal. The ASL load cell is specially designed t...
The Aqua-M100D is used in the water supply bussines to pre-locate (testrod) and to calibrate leakages (geophone). In combination with the Pulse Wave Generator (PWG), it can also be applied to trace the run of a pipeline. The testrod has been developed by F.A.S.T GmbH and features an extremely high sensitivity. It has been designed to detect even minute leakages. The vari...
- Calibration free due to quartz wedge compensation - Extremely highly stable readings - Reliable measurement of dark samples - Combination with refractometer (Purity analyser) The Saccharomat is a fully automatic sugar polarimeter. The Saccharomat is a fully automatic sugar polarimeter with quartz wedge compensation and complying with the ICUMSA recommenda...
Combining the versatility of the Ultraprobe 15.000 Touch and the ability to inspect in hazardous areas with the Ultraprobe 9000ATEX, the 15.000IS Kit is the most comprehensive product in the market for ultrasonic inspection. It is the perfect solution to start an Ultrasound program which needs to reach hazardous areas as well. Applications: Leak Detection (compressed ai...
• Maximum allowable pressure up to 45 bar / test pressure up to 50 bar • For direct mounting on a pressure connection (free standing) or with a capillary tube • Direct mounting reduces the number of joints and thus avoids potential leakage • Direct mounting saves cost for flexible hose and additional fittings • Precise setting and repeatability • High temperature version...
with Peak and Recording Function Stainless Steel Housing The LEO 5 combines the notable features of Keller’s successful LEO-Record and LEX 1 digital pressure gauges, featuring an IP66-rated stainless steel enclosure. This robust housing combines contemporary microcontroller-based electronics and capacitive-touch controls, operated through the environmentally-sealed sa...
Max.- and Min.-Function / Accuracy: 0,5 %FS ECO 2 is a compact and economical digital pressure measuring instrument providing medium accuracy at high resolution and repeatability. The piezoresistive pressure transducer as the heart of the instrument has gone through extensive pressure- and temperature tests. The pressure is measured twice per second and displayed. The ...
HEITRONICS Infrared Radiation Pyrometer Series CT18 and CT18LL are specially designed for highest measuring accuracy in temperature determination and -control in the metalworking industry, in semiconductor processes, in glass manufacturing, in foundries or generally for use in extremely harsh environments. Even the use at ambient temperatures of up to 300 °C is easil...
Sony has commercialized the "IMX323LQN" CMOS Image Sensor that realizes a compact and thin package while maintaining low illumination performance equal to that of the existing Sony product (IMX222LQJ*) that improved sensitivity in the near infrared region for industrial applications. WLCSP (Wafer Level Chip Size Package) technology is used to realize a smaller size while...
The wall mounted meat hook scale iL Special 150H/SP is an electronic load receptor without lever work entirely made of 1.4301 stainless steel designed for wall mounting. Depending on the installation location, the wall-mounted scale has a variety of fixture elements for optional attachment using pins, injection anchors or threaded rods. The load receptor is fitted with a...
Due to the extremely high availability and its flexible interface protocols this weighing system can be perfectly integrated in your cash register system. Area of Use : - Weighing system with a separate load receptor - Cash register Highlights : - Ergonomic zero setting and taring of the scale - RS 232 for connection of cash register systems - Hardw...
This load receptor stands for highest precision, is entirely made of s/s and is thus perfectly suitable for harsh industrial environments. The iL Precision 35F/EMK impresses by its high resolution, short measuring times and long-term stability. The integrated calibration weight assures continuously high accuracy of the scale allowing reliable inspection equipment control...
The difference to the AZ 16 is that the RSS 16 does not have a mechanical actuator. The identification of the target is contactless using the RSS technology developed by Schmersal: A technically safe physical RFID signal is responsible for the communication between the transmitter and receiver. This technology creates the prerequisites so that the user of the RSS 16 c...
The functional diversity of a digital mirror reflecting camera often overstrains the user. Using our App all valid settings are predefined and can be adjusted very quick and easy. Thus incorrect and faulty measuring results are almost impossible! Application of glare evaluation The LMK mobile air allows easy measuring and verification of existing standards and ...
The earth-fault indicator type TERRA consists of: – One display unit for displaying the earth-fault – One sensor type SE for detecting the earth-fault Order Data Type TERRA | panel-mounted 26.20.10 Type TERRA | surface-mounted 26.30.10 FEATURES AND BENEFITS Five trip currents between 20 A and 160 A - Optional: One fixed trip current Flag indication Optio...
The GMS 4000 is equally suitable for overground gaspipe network checking, measurement of gas and ground gas, gas analysis or room air monitoring. With its infrared measuring technology this measurement instrument can accurately identify natural gas and CO2 without cross-sensitivity. The GMS 4000 automatically detects heavy gas, has explosive protection certification and ...
