• Maximum allowable pressure up to 45 bar / test pressure up to 50 bar • For direct mounting on a pressure connection (free standing) or with a capillary tube • Direct mounting reduces the number of joints and thus avoids potential leakage • Direct mounting saves cost for flexible hose and additional fittings • Precise setting and repeatability • High temperature version...
The extraordinarily high dynamics range and excellent signal to noise ratio of the CHRocodile sensors ensure the best results on surfaces with differing reflectivity and from different angles. Sensors can be simply switched from chromatic-confocal mode to interferometric mode, and are universally applicable in quality assurance and production.
The BCT-2000 tests any size string up to 256 cells, performs constant current capacity and power capacity tests, supports UPS testing using AC load banks, and supports run-down testing using system load. The best proven method for determining whether a battery will perform is to test it under load conditions. Proper load testing is the only way to determine where the ba...
OIML R76 & EN 45501 Approved, single or multi range, 6000 div at 0,6 µV/div. Friendly configuration and calibration menu. High resolution: 24 bits A/D, 16 million internal division; 100.000 external division. 50 reading/sec. Display 7 digit 20mm LED high bright. RS-232 port for PC, printer or remote display connection. Excitation: at 6 V DC, for up to 4 load cells 3...
Built-in 4ch BERT and sampling oscilloscope Simultaneous 4ch Bit Error Rate (BER) measurements High-quality waveform PPG (1 ps rms Jitter) High-input sensitivity (10 mVp-p minimum input sensitivity) High-speed Eye Mask test and Eye pattern analysis at 150 ksample/s max. Supports differential signal BER measurement, Eye Mask test and Eye pattern analysis Up to six b...
Delivery: central unit with display and output for headphones universal microphone for measurements with testrod/geophone 2 Extensions with testrod tip Tripod headphones battery charger Transport case Operation manual
Where Flow Conditioning Is Needed Air flow measurement is most accurate in straight duct runs where air flow can be evenly profiled across the duct at the point of measurement and where no turbulent, reverse, or cyclonic flow patterns are present. Typically, it can take as much as 10 diameters of straight duct run to eliminate turbulent or reverse flow, while it can tak...
with Peak and Recording Function Stainless Steel Housing The LEO 5 combines the notable features of Keller’s successful LEO-Record and LEX 1 digital pressure gauges, featuring an IP66-rated stainless steel enclosure. This robust housing combines contemporary microcontroller-based electronics and capacitive-touch controls, operated through the environmentally-sealed sa...
Max.- and Min.-Function / Accuracy: 0,5 %FS ECO 2 is a compact and economical digital pressure measuring instrument providing medium accuracy at high resolution and repeatability. The piezoresistive pressure transducer as the heart of the instrument has gone through extensive pressure- and temperature tests. The pressure is measured twice per second and displayed. The ...
HEITRONICS Infrared Radiation Pyrometer Series CT18 and CT18LL are specially designed for highest measuring accuracy in temperature determination and -control in the metalworking industry, in semiconductor processes, in glass manufacturing, in foundries or generally for use in extremely harsh environments. Even the use at ambient temperatures of up to 300 °C is easil...
- Measuring range 0...50 Pa to 0...6000 Pa - 4 calibrated measuring ranges selectable via DIP-switch - Analogue output signal 0...10 V - Supply voltage 15...30 Vdc or 24 Vac (±15%) - Compact plastic housing IP 54; UL 94 HB The differential pressure sensor DS85-PE is used to measure small differential pressures in ventilation and air conditioning. The measurement r...
• High- and low pressure switches • Precise settings and repeatability • Protection per EN 60529: • IP67 (cable version) • IP20 (connector version QC) • Direct mounting to the compressor possible • Normally open/closed electrical contacts (under standard operating conditions) • TUV approved versions • Compatible with RoHS directive • No options. Only available with the s...
Due to its low design, products can be easily applied to the iL Special 2000FF/MP. But this platform is truly remarkable when it comes to higher demands on hygienic cleaning. For this purpose the deck can be lifted by a single person. This movement is supported by a gas-pressurized spring which is balanced in such a way that the deck can hold its position. Area of Use :...
2000 to 6000 counts True RMS Wireless DMM with Non-Contact ACV & A Check/ Single Probe ACV Live Locate BS4100/B series is an advance designed 2000 to 6000 counts multi-function digital TrueRMS multimeter. It consists of 3 models. BS4101 is the basic 2000 counts model with capacitance and frequency measurement. BS4102 4000 counts with all BS4101 functions and temp...
5 Models, MultiMax 96F/FE/PEC/PECH and PECD to meet all applications for multi-functional measurements Features Ultra-bright red, 3 line, 4 digit LED eye soothing display Low back depth of 80mm Onsite User programmable CT and PT ratios True RMS measurements Decimal point selection is onsite available SPAN and Zero pot for full scale and Zero adjustment Elec...
The wall mounted meat hook scale iL Special 150H/SP is an electronic load receptor without lever work entirely made of 1.4301 stainless steel designed for wall mounting. Depending on the installation location, the wall-mounted scale has a variety of fixture elements for optional attachment using pins, injection anchors or threaded rods. The load receptor is fitted with a...
Due to the extremely high availability and its flexible interface protocols this weighing system can be perfectly integrated in your cash register system. Area of Use : - Integration in your existing cash register system - Weighing system for integration of Datalogic MagellanTM 8300 and 8400 scanner Highlights - Reliable, high performance multi-interval ...
Due to the extremely high availability and its flexible interface protocols this weighing system can be perfectly integrated in your cash register system. *Area of Use : - Integration in your existing cash register system - Weighing system for integration of Honeywell MS 2221 StratosSTM and MS 2421 scanner *Highlights : - Reliable, high performance multi-interval we...
Due to the extremely high availability and its flexible interface protocols this weighing system can be perfectly integrated in your cash register system. Area of Use : - Weighing system with a separate load receptor - Cash register Highlights : - Ergonomic zero setting and taring of the scale - RS 232 for connection of cash register systems - Hardw...
This load receptor stands for highest precision, is entirely made of s/s and is thus perfectly suitable for harsh industrial environments. The iL Precision 35F/EMK impresses by its high resolution, short measuring times and long-term stability. The integrated calibration weight assures continuously high accuracy of the scale allowing reliable inspection equipment control...
Accurately measures total level, interface and temperature Modbus RTU Output Stainless Steel or Flexible Probes Flexible probes offer longer measurements up to 50 ft. Easy installation and no calibration required 0.01% Accuracy FM and FMc Class I Div 1 Approvals
Sony has commercialized the "IMX323LQN" CMOS Image Sensor that realizes a compact and thin package while maintaining low illumination performance equal to that of the existing Sony product (IMX222LQJ*) that improved sensitivity in the near infrared region for industrial applications. WLCSP (Wafer Level Chip Size Package) technology is used to realize a smaller size while...
It consists of a compact reader head with all the electronics and optics integrated into a single body that may be mounted from the side or from the top. It has an LED to help mounting it and includes a 1 or 3 meter cable with a connector, a 10 mm wide adhesive reflective stainless steel tape that is highly resistant to solvents.
The R4 V-S load receptor, in IP 65 protected stainless steel, is fitted with 4 shear beam load cells for optimal reliability and accuracy. Its modular presentation enables it to be located easily. All functions of the i20 indicator are available and the user will appreciate the ergonomics of simple or elaborate applications. General description of the C20 R4 V-S Indu...
High Accuracy Measurement Capability with Unsurpassed Flexibility and Versatility The MarSurf FI 1100 Z interferometer provides non-contact measurement of flat or spherical surfaces along with transmitted wavefront measurements of optical components and assemblies. Measurements may be made using basic visual fringe inspection, static fringe analysis, or phase-modulated ...
For the operating interface you need a so called FDT2-container, e.g. PACTware, in which the DTM must be integrated. However the user interface of the DTM is more intuitive and clearly presented. Archiving and printing of the parameter setting, as well as the data upload is also much more convenient. The DTM possesses the same parameter set as the DD has for the HART-...
Contactless magnetostrictive linear position transducer with RS422-SSI digital output interface. The absence of electrical contact on the cursor eliminates all wear and guarantees almost unlimited life. Compact size for simple installation. Full protection against outside agents for use in harsh environments with high contamination and presence of dust. Excellent lineari...
The difference to the AZ 16 is that the RSS 16 does not have a mechanical actuator. The identification of the target is contactless using the RSS technology developed by Schmersal: A technically safe physical RFID signal is responsible for the communication between the transmitter and receiver. This technology creates the prerequisites so that the user of the RSS 16 c...
The M8000 series miniature plastic float switches are designed for liquid level sensing for a wide variety of fluids and conditions. These hermetically sealed float switches provide years of dependable sensing at an economical cost. Used with standard 1/8” NPT threaded stem, these plastic switches provide control signals for many different liquid level sensor application...
Manual, automatic or centralised heating/cooling with an external input selection; dead band function and changeover base on supply water. Possibility to control valves or fan or both. LCD showing all set functions. Suitable for On/Off, PWM, Floating actuators, resistor and heat pump control. Special functions: Economy, Dirty Filter Warning, Window contact. Facility for ...
250bar Pmax The model S34 Differential Pressure Switch is suitable for setpoints between 6mbar and 10bar with maximum working pressures up to 250 bar Epoxy coated aluminium or stainless steel housings approved to IP66 and NEMA 4X SPDT and DPDT switch contacts with environmentally and hermetically sealed options Stainless steel wetted parts as standard B...
ATEX ATEX certified for working under potentially explosives atmospheres, in zone 2 (gas) and zones 21-22 (dust) EU- type approval for NAWI, OIML R76 & EN 45501 single or multi range, 6000 div at 0,6 µV/div Friendlyconfiguration and calibration menu High resolution:24 bits A/D, 16 million internal division; 100.000 external division. 50reading/sec Display 7 digit 20m...
Using diaphragm based sensors and a more traditional in-line force balance mechanism to transfer movement from the sensor to the microswitch, these switches are suitable for a wide range of industrial applications. Various international approvals make the Industrial Series suitable for use in both safe and Hazardous Areas in Europe, North America and throughout the world...
The 2HT can be supplied with an option D-CAL digital display that not only provides users with a visible indication of the measured pressure but that also provides users with access to over 80% of the transmitters HART commands, thus reducing the need for costly third party communicators.
Data from a metrological transaction with Metrolog Calibration software are automatically integrated in Sirius Storage software. It is compatible with the SPY RF N, SPY TOUCH'N and SPY IP and exists in incubator version (distinguishable by its green ring on the connector). Ref 06556 : (-40 to +80°C) 3 m flat cable, ± 0.3°C from -20°C to +30°C and ±0.5°C out of this r...
Professional and hobbyist level quadcopters and drones are becoming more popular in the marketplace. A quadcopter by definition uses its four propellers to generate air lift and change directions. The propellers are designed to work in conjunction with each other to insure that there are no torque imbalances to send the vehicle spinning out of control. How it Works 1...
