As a toughened epoxy, Supreme 12AOHT-LO resists rigorous thermal cycling and shocks over the wide service temperature range of 4K to +500°F. It offers high thermal conductivity of 9-10 BTU•in/ft2•hr•°F and is a competent electrical insulator. It bonds well to an array of substrates including metals, composites, glass, rubbers, ceramics and many plastics. This compound...
LÖSOMAT reinvented this simple and approved tool. It has a clever devised construction and new features. For example: The non-destructive overload protection or tooth flanks with ceramic-teflon coating. The LÖSOMAT Torque Multiplier is featured, like all LÖSOMAT torque wrenches, with an individual factory calibration certificate.
Impressive functionality The simalube® IMPULSE, together with simalube lubricators in sizes of 60, 125 or 250 ml, ensures reliable lubrication when faced with high counterpressure and lubrication lines of up to four metres. Continuous lubrication impulses of 0.5 ml supply the lubrication point with oil or grease up to NLGI 2 at a pressure of up to 10 bar. This action is...
Pressure : 6,2 bar Power : of clambing ID : Supply hose Ø 10 mm for air inlet R 1/4 Ø 13 mm for air inlet R 1/2 Ø 19 mm for air inlet R 3/4 Supplied with 3 adaptors : Profiles: ISO B, 7.2-7.4mm and ARO for quick connection
Environmental Lubricants Manufacturing, Inc. (ELM) is the world leader in manufacturing biobased greases using a patented microwave based process. Due to ELM's success in the use of microwave technology the price of their biobased grease is approaching conventional grease prices. The Wire Rope Grease is also made from carefully selected renewable vegetable oils that are ...
Clinton, MO — Champion Brands, LLC, a recognized industry manufacturer of full synthetic motor oils, announced today the addition of “Paladin Motor Oils”, a globally - targeted export chemical and lubricant product line. “The word Paladin is often defined as a leader and champion of causes”, stated Karl Dedolph, Director of International sales. “We are excited about ...
Leading manufacturer and supplier of explosion proof lighting equipment Larson Electronics has announced the release of a 90 watt LED wall pack light that is used to replace traditional 400 watt metal halide light fixtures and saves 87% in energy and maintenance costs. The LEDHWP-900 LED wall pack light from Larson Electronics offers high light output from a compact f...
Monprene® IN-23000 Series Compounds from Teknor Apex Are Available in Small and Pre-Colored Lots, Can Be Run in PVC Tooling, Need No Pre-Drying, and Avoid Paint Staining GELEEN, NETHERLANDS, -- A new series of styrenic block copolymer elastomers from Teknor Apex Company exhibits performance comparable to that of thermoplastic vulcanizates (TPVs) widely used in window ...
Innovative, portable, reliable The world's first for applications up to 6.000 N·m allows fast, flexible use in the most diverse of bolting applications. Double patented bolting control and Li-Ion battery technology ensure powerful and enduring operation. A unique safety system and microprocessor electronics, coupled with the new high-power gear unit make it into a...
Larson Electronics has added to its extensive range of industrial grade lighting equipment with the release of a 320 watt quadpod mounted work light. Built to provide a high power lighting solution that requires minimal setup time, the WAL-LQP-320WSA-LED provides operators with an ideal lighting solution that features a quadpod with solid wheels for portability and a sin...
Type RS-99’s high Alumina content is ideal for high vacuum, reducing atmospheres and other applications where silica cannot be tolerated, such as in Solid Oxide Fuel Cells and setters for P/M and MIM sintering applications. Refractory Sheet Type RS-99 is available in three versions: • Type RS-99M is a highly plastic moldable sheet ideally suited for formin...
Combining exceptional quality, excellent transparency, impact strength, chemical resistance and fire performance, Marpet-a FS is ideal for applications which require its high performance characteristics and processability. Its ability to cost effectively machine, cold bend and print lends Marpet-a FS particularly well to fabrication of items for the visual communications...
The great stroke of 12 mm avoids hologram generation by diffuce polishing result. The low weight and vibration reducing housing material offer usage over a whole work shift. The ergonomically designed housing provides a comfortable handling. Additional the convertible second handle can be mounted on both sides for right handed or left handed users. A velcro plat...
RICHMOND, VA — Weidmuller introduces two new high-quality, self-adjusting crimping tools, the PZ 10 HEX for hex-shape crimps and the PZ 10 SQR for square-shape crimps. These new crimp tools create stable electrical crimped connections that meet the requirements of DIN 41641-1 for solderless crimping and exceed the pull-out forces stipulated by DIN 46228 1-4 and UL 486 A ...
“We’re seeing gas-powered saws with 100 hours of run time on them but 3,000 starts,” said Dan Hull, manager of dealer services for the Virginia Beach, Va.-based tool maker, on Feb. 4 at this year’s World of Concrete show. “It’s like starting your car, going to your mailbox, shutting your car off, starting it back up again and driving back to your driveway.” The TSA 23...
The Deros sander plugs into a 110v power supply and offers the performance of a conventional 500W electric machine, even under heavy load, the manufacturer says. It has a closed construction, which prevents dust entering the motor, avoiding typical wear and tear damage experienced by electric machines, prolonging its lifespan and making it low maintenance, it is claim...
- thickness < 3mm ( according to material ) - Ideal tool to face a band saw cut before automatic welding - Accurate manual advance: 0.1 mm step graduation 4/1000 inches - Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing - 30° and 45° outside bevel possible with optional tool holder. - Squaring and bevelling in one operation. -...
This air angle grinder is used in machine building, garages, craft sector, ship yards and automobile industry. This small-sized air angle grinder is ideally for work in confined spaces thanks to flat angle head. Excellent weight-power ratio. The centrifugal governor provides consistent speed under load. The pneumatic angle grinder with its standardized chuck Ø 22 m...
Our ALFRA Manual Hydraulic Punch Drivers Compact Flex ™, battery powered Compact Flex ™, Compact ™ and Compact Combi ™ now NEW can punch up to Ø 152 mm (3 mm in S235) with the Monocut ™ puncher. http://www.alfra.de/fileadmin/redakteure/Flyer/ALFRA_Stanzen_EN.pdf
• Optimisation of machineries lifetime • Reduce stoppage and breakdowns • Accurate control of lubricants consumption. MOLYDAL offer different systems allowing a precise and accurate debit on each bearing, according to the real need. • Dual Line systems for numerous points to be greased/long distance lubrication channel (iron and ...
Material and surface: Profiled aluminium tray. End caps of black satin finish polyamide PA 6. The tray handle is glass ball blasted and anodized to a satin finished surface in natural or black colour. Design A: Installation by means of an upper rubber insert that pushes in from the back. Design B: Installation by means of 2 galvanized countersunk screws M4 x 8,...
Honeycomb-deflectors attain a significant efficiency of the flow, eliminate turbulences, reduce the transport of impurity and humidity, as well as noise and energy consumption. All major commercial refrigeration companies world-wide use this kind of honeycomb. The versatility of the honeycomb is also demonstrated by the way it focuses light. Polycarbonate honeycomb w...
•This small-sized air angle grinder is ideally for work in confined spaces thanks to flat angle head. •Excellent weight-power ratio. •The centrifugal governor provides consistent speed under load. •The pneumatic angle grinder with its standardized chuck Ø 16 mm is useable for versatile applications, e.g. scrubbing, brushing, grinding and cutting. •The spindle lock en...
The compact wire rope isolator is smaller than a traditional wire rope and can absorb shock and vibration in small spaces. Single point mounting offers flexibility for integration into existing products. Wire rope Isolators With versatile mounting options, crimping patterns, and size variation, helical isolator products can help your systems meet all requirements for ...
The feet are composed of a threaded rod M12 or M16 with the respective fastening and lock nuts, as well as the stainless steel base in shiny look with fixed ESD anti-slip mat for a secure stance. Depending on your application you can choose between various diameters, lengths and the possibility of floor mounting for M16. You can either close the aluminum profile-ends w...
A simple solution to smaller diameter lower pressure flange joint misalignment.
Torque Range: 1 - 22 Nm (9 - 194 in-lbs) Features: •Precise Shut-off Clutch provides excellent repeatability •High performance 18VDC Li-Ion Batteries •Versions available with internal or external clutch adjustment •Hi/Lo Speed Selection switch •Forward/Reverse Selection switch o Clutch operates in Reverse direction at approx. 30% higher torque...
Properties Outstanding resistance to a wide range of chemicals Very broad functional temperature range, only limited at the upper end by resistance of the adhesive used Very good antiadhesive properties Dimensional stability and resistance to stress cracking No embrittlement, no ageing When modified PTFE is used as a film material, these pro...
For special applications, the clamping flange can be replaced with another clamping flange by loosening the clamping screw. The clamping flange must always have a contact point on both sides. Functional principle: 1. Use a hand-held or electric tool to tighten the hexagon head bolt (make sure that the maximum tightening torque is not exceeded). When clamping, the c...
Black thermoplastic, mat. With octagonal blind hole, self-locking. Suitable for smooth round shaft, tolerance H9. Easy to mount. Available in stock for prompt delivery. For certain minimum quantities custom colors available upon request. For more technical information you can visit our web-site www.gamm.com.
WaveSeal 360® clamps are comprised of two main parts, the all stainless steel clamp assembly and the “W” shaped wave ring spring liner. The wave ring spring liner is made of high quality stainless steel and is integrated inside the clamp. The liners thin gauge steel expands and contracts around the hose with temperature changes. The clamp rides on top of the lubricate...
All our products are produced in according to the needs of our clients, so it's the client who choose all the characteristics of the panel COMPOCEL AL like skins' finishing and thickness, panel's thickness, dimensione etc. In shipbuilding sandwich panels ALU-ALU can be used for the following applications: partitions, interiors, furniture, ceilings and floors. To recei...
The composite uses Vitrox resin from Huntsman Polyurethanes (Auburn Hills, Mich. and Everberg, Belgium), a “tunable” snap-cure system (see CT Feb 2011 and CT April 2014 articles) and core from partner Expanded Structured Composites GmbH & Co. KG (a.k.a. ESC GmbH, 3D|CORE or 3D-Core, Herford, Germany), a manufacturer of structural foam core products based on polyethylen...
Tilon Composites said that the installation of a new plastics recycling line at its South Wales facility has given it greater control over the cost and supply of the raw materials used in the production of Supadek. Coupled with changes to operational procedures and distribution of the product, total price reductions of at least 33% for the plastic scaffold boards have...
Particularly suitable to sand taper and cylindrical poles, wood garden furniture, outdoor wooden furniture, wooden outdoor playsets. A.m. machine allows sanding operations on parts with max. diameter 203 mm. - minimum bending radius 225 mm., both shaped and taper parts; machine can be also equipped with automatic feed systems for straight, bent or taper parts and with h...
Features: • Programmable Batch Counting with Audible Buzzer indicating batch complete • Programmable Time Window for Comparison with actual fastening cycle time- LED’s indicate OK/NG rundown cycle • Selectable Slow Start Speed and time • Large LED Display of Screw Count Values • Externally Accessible I/O Connections • Optional Timed Auto-Reverse for application...
