MaxxHeat is available on Maxxima Vionic LED headlights in three sizes: 4x6 inches, 5x7 inches, and 7-inch diameter. Available in high, low, and dual-beam models, the line features the LED replacement headlamps for trucks, buses, and other vehicles used on and off the highway. The MaxxHeat STT series of stop/tail/turn lights is designed for commercial truck, bus, and trai...
The adjustable hand levers with solid stainless steel handles are intended for use in hygienic design applications, such as in the packaging, food processing, medical, and dairy industries. the sealed mounting surface enables fastening without dead spaces. The high quality finish and impervious exterior surfaces prevent adherence of dirt and facilitates cleaning. “The...
When the spring mechanism in the pin is activated by a press of the button, the balls move inward and the ball lock is released. When the button is released, the balls move back out and the ball lock is activated again. This ensures strong and self-retaining fastening; an accidental release of the pin by external influences is not possible. Statement by the Jury The ...
The Aura™ 120 Narrow Section gas seal enables the latest John Crane gas seal technology to be fitted into a larger percentage of older equipment, bringing with it the benefits of non-contacting design. Gas seal technology eliminates the need for oil lubrication associated with contacting seals and the resulting need to address harmful emissions entrapped in the oil. In t...
When compared to standard wooden planks, commonly used in the building industry, Stadeck panels are better recyclable and according to the manufacturer Sabic, Riyadh, Saudi Arabia, up to 60 percent lighter. They reduce the overall structure weight of the application and cost up to 32 % less than conventional planks. Corrosion-free and moisture resistant, Stadeck panel...
These modular DIN rail enclosures are made from self-extinguishing PC/ABS plastic and are available in sizes from 17.5 to 45 mm. They are easily assembled without screws, and have breakable hole covers. There is also an internal adapter for the insertion of small PCBs in the enclosure, panels and front cover. Expansion spacers are available to increase the enclosure s...
These left hand threaded shaft collars are available in bore sizes ranging from 1/8 inch to 2-1/4 inches and 4 mm to 30 mm. Each shaft collar has double tapped threads to ensure a precise and burr-free finish allowing for easy installation and removal, proper fit, and extended shaft life. They also feature tightly controlled face to bore perpendicularity (TIR ≤ 0.00...
The design eliminates the need for external guidance by surrounding the shaft with an aluminum cover tube with molded internal splines that lock onto the nut to keep it from turning. This design also features an integrated bushing that enables it to withstand small radial and moment loads. The actuator configuration provides simple integration into any assembly with a...
As a flexible epoxy compound, it offers superior resistance to impact, thermal shock, vibration and stress-fatigue cracking. When combined with the wide service temperature range, this flexibility makes Supreme 10HTFL particularly well suited to thermal cycling applications. “Its performance properties are at their most impressive when bonding substrates with wide differ...
D-SUB multi-pin connectors provide a solderless, press fit reliable I/O connection that can be permanently locked down with a mating multiple socket D-SUB connector and will not come loose or break off during handling or environmental exposure to shock and vibration. Typical applications include military communications, commercial aviation, Hi-REL electronics, SATCOM, te...
New microPEM MSOFS flaring standoffs from PennEngineering provide ideal miniature fastener solutions to attach and/or space components in compact electronic assemblies. They install permanently in thin panels of any hardness and material, including stainless steel, other metals, plastics, and printed circuit boards. A unique flaring feature adds value by allowing for ins...
John Deere Power Systems is prepared to lead its OEM customers seamlessly through the upcoming Stage V transition, thanks to its global field-tested experience. John Deere, among others, pioneered advanced emissions technologies for previous tiers, which were foundational for its Stage V ready solutions. “These trusted technologies provide OEMs and end-users the conf...
The VCR technology meets the challenges of downsizing and the associated increase in combustion pressure by enabling optimal adjustment of the compression ratio at any time. FEV says the two-stage VCR connecting rod it developed is already being used in multiple demonstration vehicles. The company says it also has prototypes for heavy-duty and large engines.
The high quality of our products as well as the continuous research of solutions responding to our customers needs are Paoli's keys to success both for Motorsport and Automotive. The constant innovation and investments made in R&D for Motorsport allowed us to develop safe, performing and longlasting impact wrenches suitable for the automotive and industrial fields. This...
Epoxyset introduces an innovative structural epoxy adhesive, SetWORX 90. SetWORX 90 is a toughened, 2-part epoxy adhesive which exhibits a 90 minute work life and cures to create an ultra-high bond strength. This epoxy adhesive and sealant bonds to a wide array of substrates including most metals, glass, ceramics, wood, and many plastics. Unlike many other toughened epo...
The system is composed by an external unit with niche, cap (with or without key) and removable filter, and an internal unit with flexible hose (specific for liquid fuels or oils) and terminal connection to be screwed or welded to the tank.
Seco’s TK1501 and TK0501 insert grades are dedicated cast iron turning grades said to provide high toughness and wear resistance, reduce tool waste, and process more parts per edge. The grades have a wide application range and offer increased in tool life and productivity. The tools are coated with Seco’s Duratomic coating process, which manipulates aluminum and oxyge...
Tanis offers its Ceramix wheel bench grinders with advanced grain technology and good performance on curves for burr removal, cleaning and surface blending. The abrasive nylon brushes are made with a metal hub construction that offers consistent finishing action and safer performance. A less dense filament structure allows the wheel brush to conform to irregular surfaces...
Walter Surface Technologies’ Blendex U Turbo blending disc is designed for enhanced blending and finishing in metalworking shops. The disc is made using a heat-resistant, non-woven matrix, which helps it to provide a more consistent finish without smearing. The disc is made of self-sharpening grains, extending tool life while providing uniform finish, the company says. T...
The cover plates promise to be quick and easy to install with snap tabs that accommodate plate thicknesses from 0.125 in. to 0.25 in., a feature that can allegedly reduce installation time by more than 60 percent. The plates are available in two standard sizes of 4-in. round and 6-in. oval and two colors, gray and black. They come in sets of two and each set includes a f...
It is perfect for professionals who do not have time for disposable silicone paper or for cutting tape with scissors or a cutter. The fields of application range from small household repairs to sealing insulation and from the automotive to the white goods sector. As it is produced to order and in minimum medium-to-high runs, it can be made with adhesives for disparate ...
Vintage is a must for trend setters! Unsurprisingly, we are absolutely fond of the “concept 1865”, based on remodeling the 19th century bicycle and initiated by chemical company BASF and design studio DING3000. What was particularly noticeable with this bicycle was its enlarged front wheel, an element both German companies, BASF and DING3000, wanted to position back in t...
3D printing is on the cusp of disrupting nearly every industry that it touches, and the auto industry is certainly no exception. Automotive engineering consultants EDAG unveiled the EDAG GENESIS concept Geneva Motor Show last March, a futuristic vehicle built out by 3D printers. Additive manufacturing allows incredibly precise production of staggeringly aerodynamic forms...
Every American remembers the terrible wildfire that trapped and killed 19 firefighters in Arizona last year. One of the reasons that caused this tragedy is the fact the firefighters cannot trust their fireproof shelters in last resort. As it turns out, their fire equipment is inefficient when fire overtakes them. And that is precisely what SunSeeker decided to change. ...
What do you get when you combine Renishaw’s metal-based additive manufacturing know-how, with the cutting edge design of Empire Cycles? A metal bike frame that is a third lighter and four times stronger! Using their expertise in metal-based additive manufacturing and ‘topological optimisation’ software – program that determines the ‘logical place’ for material; Renish...
Bayer MaterialScience has taken the traditional wooden cello and modernized it– with polyurethane. The fully-functional cello is made of Bayer plastics, making it lightweight and portable, as well as capable of incorporating a suite of optical effects. The Cello 2.0 is made of crystal-clear cast resin that can be molded into almost any shape, which also allows interac...
Sogefi Group has launched the motor industry’s first coil springs made from composite materials. The FRP Coil Springs are a very eco-friendly innovation and are destined for use in Personal Vehicle, PV, and Light Commercial Vehicle, LCV, suspension systems. The coils are 40 percent to 70 percent lighter than current steel coil springs and will bring tangible reduction...
A team of researchers at the University of Michigan has developed a way to increase the fire resistance of lithium-ion batteries by replacing the standard micro perforated plastic membrane (located between the electrodes) with layered non-conductive Kevlar nanofibers that prevent metal tendrils from forming inside the battery. These tendrils, also known as dendrites (gro...
Everyone has at sometime been confronted with a flat tire and let’s face it, there is never a good time for that. But there is no worse time than when you’re working on a project with a deadline. The dream solution would be a tire that never goes flat or doesn’t lose air while keeping the same sensations you get driving when with pneumatic tires. Well it seems Michelin f...
For all you bicycle lovers, let us introduce you to our latest discovery: the trendy Sandwichbike! It comes in a box! All parts are included (and it won’t take you more than 45 min to set it up!)! Yes, the bike is light (17kg) and easy to maneuver for people from 1m60 to 2m! Enjoy building it, riding it and letting everyone know you’re the creator behind the machin...
Carbon nanotubes are being viewed as the next major breakthrough material that will help car manufacturers create lighter and stronger cars. We have already seen how carbon-fiber composites have made the jump from professional racing to production cars such as the BMW i3. Thanks to its superior atomic-bonded crystal structure, the carbon nanotube is considered the strong...
A European collaborative group is trying to develop cheaper ceramic brake rotors that could one day be used in mass produced compact cars. The group is being led by Italy’s Politecnico di Torino and involves the Swiss-based Empa research institute Spanish brake manufacturer Fagor Ederlan, Liechtenstein soldering company Listemann AG and the Fiat research center CRF. Curr...
SKF today announced the introduction of the SKF Battery Driven Grease Gun TLGB 20. Developed to maximize efficiency, this unique tool includes an integrated grease meter to help prevent over- and under-lubrication. The TLGB 20 grease gun features a durable, ergonomic design with a three-point stand for operator comfort and convenience and a 20-volt, lithium-ion batter...
There are a variety of coatings for surfaces: burnishing, chrome plating, anodising or electroplating with nickel - in addition to these current techniques for surface treatment, MISUMI Europa GmbH offers further coating methods for components from the extensive product range with advantages for a wide variety of applications. According to the Fraunhofer Institute for...
With 450 to 650 mPas Vitralit® UV 4050 MV is of medium viscosity. When cured it shows a very good flexibility and an excellent stability. This transparent adhesive has a very low shrinkage of only 2%. The newly developed adhesive provides excellent adhesion to most plastics like PVC, ABS, SAN and PC, as well as to stainless steel and glass. If at least one assembly ma...
Compact and flexible: The ODU-MAC ZERO is truly impressive thanks to its versatile modularity in the smallest of spaces. This new hybrid connector by ODU, the specialist in electrical connector technology, comes in a mini plastic housing. The connector’s space-saving housing geometry enables the placement of a generous range of modules for reliably transmitting signals, ...
