Mazak says its Integrex i-100HS multitasking machine offers a small footprint and simultaneous five-axis capabilities along with maximum versatility, high precision and throughput for complex part applications. The machine is said to combine the abilities of a full-function machining center and a high-powered turning center to produce small- and medium-sized workpieces i...
Takeuchi has added seven sound-suppressed hydraulic hammer models to the Takeuchi Attachment Program. The TKB52-S, TKB72-S, and TKB102-S are compatible with compact excavators ranging from the TB210R to the TB230. The TKB-302S, TKB402-S, and TKB802-S work well with compact track loader models ranging from the TL6R to the TL12V2/R2, and compact excavator models ranging f...
The 744 P-tier, 824 P-tier, and 844 P-tier Deere wheel loaders have horsepower ratings of 316, 343, and 417, respectively. Operating weights are 54,920 pounds for the 744 P-tier; 58,334 to 61,952 pounds for the 824 P-tier; and 74,831 to 76,670 pounds for the 844 P-tier. P-tier wheel loaders have high-capacity, heavy-duty axles with standard axle cooling filtration that ...
The AxiEco from ebm‑papst has successfully established itself on the market for over two years. The versatile axial fan range has now been expanded to include a model that is specially tailored to the requirements of railway engineering and has many design tricks. The AxiEco Track was recently presented at InnoTrans 2022 in Berlin for the first time. The product range's...
Fumex C 600HT is our latest radial fan designed for demanding environments and high temperatures. It addresses industries and laboratories and can be installed both indoors and outdoors. The fan is of direct-drive design with a motor thermistor. Both fan housing and impeller are made of stainless steel (EN 1.4301). Available in 1- and 3-phase versions The impeller has ...
HC 50i and HC 70i Hamm soil compactors replace their H Series predecessors. Operating weights are 11,455 pounds for the 50i and 15,567 pounds for the 70i; drum widths are 53.9 and 66.1 inches, respectively. Permanent all-wheel drive with anti-slip control and drive motors provide gradeability and high ground clearance. With 3-point articulation and a short wheelbase ena...
The accessory is designed to control dust and prevent spillage within conveyor load and transfer zones. “Our crews visit and collect data from thousands of conveyor systems each year and we figure about half of them would benefit from material containment components,” says Paul D. Schmidgall, chief engineer in Superior’s conveyor components division. “That’s one out of ...
Multifunctional sensor configuration Optimized costs & performance Highly efficient FLYING BEAM™ Future-proof system design Minimal maintenance The world-renowned AUTOSORT™ offers legendary sorting performance that stands the test of time, delivering unparalleled throughput and purity rates across numerous applications. Compact and ultra-flexible in design, the multifun...
Rated payload is 213 tons, and rated operating weight is 715,000 pounds. Powered by a Cat 3516E engine offers two power selections: 1,900 or 2,100 horsepower. Engine design changes include modifications to the camshaft and piston for optimal fuel efficiency, and structural improvements to the cylinder head and crankshaft to deliver 12 percent more durability than the 351...
The BS 16 towed spreader from BOMAG is designed to apply powdered binding agents like lime, cement, or fly ash in an even distribution to stabilize and improve the substrate. It offers a maximum distribution width of 7.9 feet and can be mechanically reduced to a 3.3-foot width in four stages. The BS 16 features an independent drive system with enclosed hydraulic system...
Responding to the rise in e-commerce and growing demand for shelf ready packaged goods, the IRB 365 has been developed for applications including food and beverage, pharmaceuticals and consumer goods, where production line speed and adaptability are essential. “The IRB 365 can pick, reorient and place 1kg products at 120 picks per minute,” said Roy Fraser, Global Produc...
New continuous flexing 26AWG Cat5e or Cat6/6a shielded industrial Ethernet cable is available with two or four twisted pairs. Cable jacket options include Zero Halogen Flame Retardant (ZHFR), Flame Retardant Thermoplastic Elastomer (FR-TPE), and Thermoplastic Elastomer (TPE). This cable can be ordered cut to length in 1-foot increments with a 20 or 25ft. minimum dependin...
Belden, a leading global supplier of network infrastructure solutions, is excited to announce the launch of its DCX System, an innovative, high-density, end-to-end fiber infrastructure solution with built-in futureproof functionality for any data center. It provides extremely high fiber termination density in a small footprint, with 3,840* terminations per DCX cabinet, 1...
OT data from edge devices, such are sensors, is collected and processed locally in cloud applications to gain valuable insights that help optimize overall business efficiency and management. As the scale of the OT data grows, with many businesses adopting a distributed edge computing approach, securing OT data and edge devices against cyberattacks is more important than ...
Endress+Hauser announced a new version of its J22 TDLAS gas analyzer, an update to the initial release in 2021. The J22 tunable diode laser absorption spectroscopy (TDLAS) analyzer continues the tradition established by its predecessor with best-in-class accuracy, a user-friendly interface, integrated diagnostics, and a host of modular hardware. The latest updates inclu...
The two E-ACX electric cabover refuse trucks, also known as battery-powered electric vehicles (BEVs), are going through a strict validation testing process to ensure the trucks are built to handle the same challenges and requirements as its diesel and CNG counterparts. The E-ACX-64™ alpha units are both automated side loaders that leverage Autocar’s Power of One® integr...
Model 644 Deere wheel loaders is now available in a G-tier version, what the company defines as “practically equipped and economical.” The Deere 644 G-tier wheel loader has a John Deere 6.8L engine that delivers 227 horsepower at 1,800 rpm. Operating weight ranges from 39,537 to 40,135 pounds with bucket capacities from 4.0 to 4.25 cubic yards. A variety of base-level ...
This radial tire expands the ContiEarth range and is available initially in size 35/65 R33. The LD-Master L5 Traction is specifically made for loaders operating on abrasive surfaces and in face-working jobs where high productivity and assured vehicle uptime are important. The ContiConnect 2.0 integrated tire sensor monitors the tire in real time. The sensor monitors both...
Franklin Electric Co., Inc. announced the launch of the next generation of Little Giant 5-MSP compact submersible utility pump. The new pump offers the same compact size yet features a new motor designed to boost the pump’s overall performance and efficiency. The 5-MSP, originally launched in 1980, is considered a workhorse among landscape professionals, homeowners and ...
Danfoss’ SLP13 valve reduces power consumption from 29 W to less than 10 W, which can help extend run time in battery-operated vehicles. By reducing power consumption, the stabilized temperature of the valve’s new coil has been reduced by nearly 50%, which helps prevent coil burnout and enables longer service life. The SLP13 valve features a lower pressure drop than pre...
The new COM-HPC Mini standard is now entering the home stretch towards final ratification, which is scheduled for the first half of 2023. Designed for small yet extremely performance-hungry applications the new COM-HPC Mini specification will open up the prospect of developing ultra-powerful microcomputers the size of a 4- or 8-port Ethernet switch, for example. Such sma...
The LPL Series actuators utilize SMAC’s moving coil linear servomotors for industry-leading precision control often needed for end effector applications, such as parts finishing, pick-and-place tasks and assembly operations. “With the use of robots becoming more prevalent, there is a demand for actuators with a short height/low center of gravity that can act as end effe...
KMD CV driveshafts are designed utilizing high-strength steels for optimal performance under the high torque generated by EVs, military, specialty vehicles and motorsports. The driveshafts can also be used in marine, motorsports and industrial applications. KMD’s family of CV driveshafts are engineered for 7,000 Newton-meters (Nm) of torque up to 16,000 Nm of torque, at...
Terex Franna has just released a new software feature, called Safety Radar. Safety Radar has a patent pending on the design and methodology behind it. The functionality of Safety Radar is based on the limitation that, until now, Franna pick and carry cranes have been displaying to the operator the rated capacity of the crane and the load at singular point in time. Mike A...
Versatile, flexible and compact: these attributes are combined in the new duty cycle crawler crane HS 8070.1. It represents the all-rounder qualities of Liebherr’s HS series and is equipped for an especially wide range of applications. Thanks to the new design it can be individually fitted depending on the application and customer requirements. Liebherr revealed the lat...
The new 653 E Electro Battery 50t capacity battery-powered crane combines the benefits of battery technology with the proven advantages of the telescopic crawler crane design. This means you work completely emission-free and retain maximum flexibility thanks to the Dual Power Management system. The 653 E Electro Battery is the first battery-powered telescopic crawler cr...
But it’s necessary: Only an MRI has the high resolution and contrast to allow clinicians to see fine detail in soft tissue like that in the spine, or potentially life-threatening tumors, for example. The longer the scan, the higher the image quality. Fortunately, says Dr. Melany Atkins, medical director of the Fairfax MRI Center and of advanced cardiac imaging at Inova ...
Benninger Ltd. which is known worldwide for its highly innovative strength in the field of continuous textile finishing for over 160 years is expanding into discontinuous dyeing with the takeover of LAB-PRO GmbH in 2020. With this addition we will serve better our existing and future customer base with a dyeing system that addresses contemporary needs and requirements of...
The broad ANDRITZ product portfolio covers state-of-the-art nonwovens and textile production technologies, such as air-through bonding, airlay, needlepunch, spunlace, spunbond, wetlaid/Wetlace™, converting, textile finishing, recycling, and natural fiber processing. Textile Recycling Technologies by ANDRITZ With the acquisition of ANDRITZ Laroche SAS, ANDRITZ has expan...
Wolfertschwenden, 22 March 2022 - Greater efficiency, lower costs, less plastic and still the same taste and convenience: When MULTIVAC exhibits at the two leading trade fairs, Anuga FoodTec 2022 (Hall 8.1, Stand C010) and IFFA 2022 (Hall 11.1, Stand B11), it will be showing a future-proof solution for packing thinly sliced or very sticky sliced products as part of a sli...
With twin spindles, dual tool turrets, a 5-axis milling spindle, and high-capacity tool magazine, the turn/mill centre can produce a variety of parts in a single setup. Its milling spindle offers a hydrodynamically mounted Y/B axis arranged above the axis of rotation. The CNC multispindle features a modular design with user-friendly setup. Accommodating up to 32-mm bar ...
Hiwin (Booth 134514) will feature families of precision motion control components this year at IMTS, with the company's Torque Motor Rotary Tables (TMRTs) as a highlight. Designed for machine tool OEMs and retrofitters, the TMRT series enables 3-axis machine tools to be readily upgraded to 3+1, 3+2, 4+1 or even 5 axis capability. High speed, high torque, built-in high-r...
Designed to integrate directly into the manifold of a Wilden metal air-operated double-diaphragm (AODD) pump, ISD Series dampeners reduce fluid pressure and flow fluctuations inherent in AODD pumps, providing a smoother discharge flow and maximum process fluid containment. The function of a Wilden ISD Series dampener is critical in applications that need to minimize vib...
Designated as ‘J’ for drainage and ‘JS’ for sludge, the new J4, J7, JS4, JS7 and JS8 models offer flowrates from 5.5 l/s with heads up to 16 m. Their slim design and low weight of construction make them easy to transport between locations and set up for work. Stainless steel construction ensures long-term reliability against erosion and corrosion. The pumps are designed...
Designed to achieve higher capacities than other horizontal-motion conveyors, Zephyr gently moves product with minimal bounce to protect product quality and reduce noise. Now equipped to flow in either direction, the reversible Zephyr maximizes production line versatility while improving sanitation and minimizing maintenance, the company says. “We’ve made design changes...
Dash 7 Doosan wheeled excavators includes the DX140W-7, DX190W-7, and DX210W-7 and replace Dash 5 models. Operating weights on the wheeled excavators are 34,760 pounds; 46,187 pounds; and 50,706 pounds, respectively Hydraulics have been upgraded, and a one-touch power boost feature can help amplify hydraulic power. The redesigned wheeled excavators feature Smart Power ...
