Britec’s line of AC power surge protectors is designed to cover all possible configurations in low voltage installations. They are available in many versions, which differ in: - Type or test class (1, 2 or 3) - Operating voltage (Uc) - AC network configuration (Single/three-Phase) - Discharge currents (Iimp, In, Imax, Uoc) - Protection level (Up) - Protection technology ...
#International #2 #Unitedkingdom : SANERGRID and its partner GES Group (Grants Electrical Services Ltd.) deliver to the electrical network since many years in #UK and #Ireland, safety oil retention tanks for transformers. This particular job took place between 3 to 5 am in #London for the Network Rail under the full moon and with very special crane requirements and extre...
Amendments 1 and 2 to AS/NZS 5033 in 2018 made it possible to use an isolator integrated into an inverter without the need for additional adjacent DC isolators, so long as the integrated isolator met certain requirements (clause 4.3.5.1, 4.3.5.2, 4.3.3.3.1 etc.). This was a win for the industry as it results in fewer points of failure, fewer enclosures that can suffer fr...
Finder takes another leap forward in electronic component manufacturing with the new range of 68 Series 100 A power relays, that offer a power rating never before seen inside a Finder relay. Ideal for installation inside charging stations for electric vehicles up to 55 kW or for applications requiring a high switching power, these PCB relays can be used in photovoltaic ...
Within the solar installation is the inverter which receives Direct current (DC) from solar strings as input and puts out Alternating Current (AC) to the grid on the output end. During installation, routine maintenance and emergencies it is necessary to isolate the panels from the AC side, and hence, a manually operated isolating switch is placed between the panels and ...
Now available in the new sizes from 40-50-60 kVA, Sentryum S3U is a transformer-free UPS with double conversion ON LINE technology that provides high levels of power availability and energy efficiency up to 94.5%. Ideal for the protection of small or medium-sized Data Centers and "mission-critical" applications, Sentryum S3U has been designed by choosing a "Green Technol...
What is MCB? A Miniature Circuit Breaker (MCB) is an automatically operated electrical switch used to protect low voltage electrical circuits from damage caused by excess current from an overload or short circuit. A MCB works same as a fuse isolator but MCB is still reusable even after interruption of the circuit after an overload or short circuit. Moreover, they are m...
Smiths Interconnect announced today that its high reliability Hypertac® hyperboloid contacts are now available for sale on the new HYPER Series catalogue. Hypertac hyperboloid contacts are known worldwide for providing a stable and durable connection in applications operating in challenging conditions where reliability and safety are critical.
ITALIAN COMPANY THAT PRODUCES ROTARY CAM SWITCHES FOR THE AUTOMATION SECTOR
EverExceed delivered Tubular OPzV gel range batteries for PLN solar project in Indonesia. We provided 384 cells of OPzV 800 and helped finishing the installation of the project successfully. OPzV batteries have excellent deep discharge recover ability and PSOC performance which is perfect for solar power system. EverExceed state-of-the-art manufacturing facilities with...
At present, China's domestic alumina prices are still expected to rise, and alumina prices are expected to remain high in the short term. It is difficult to recover alumina production capacity from reduced production capacity in the near future, and it is difficult to change the tight supply situation in the alumina market in the short term. Overseas alumina plants are ...
Finder's 7L Series, which now includes more than 20 versions, is ideal for the lighting of electrical enclosures and cabinets, providing adequate lighting for operator control and maintenance operations. Choosing to illuminate an electrical panel using LEDs over other kinds of lamps can help to maintain an adequate temperature inside the panel and, consequently ensure th...
While transformer container bunds may look simple enough, they are absolutely essential pieces of industrial equipment. They play a key role in preventing risks to human health and to the environment. Whether fixed or mobile, they serve to contain any possible leaks of dielectric oil, thus protecting against occupational and ecological hazards. They also enable complianc...
With the increasing reliance on interconnected equipment in the domestic and business sectors, adequate surge protection is essential for the maintenance of any business. The replacement of any damaged element or its rapid degradation entails large financial outlays that are sometimes difficult to bear. Overheating, on the other hand, increases the likelihood of fire and...
Commercial battery energy storage systems enable electricity storage for later uses whenever and wherever needed. They are usually integrated with various components, which can be grouped based on their functions as shown here below.
The digital transformation and the IoT revolution (Internet of Things), permanently interconnected teams, are making everyday life and economic sectors more and more dependent on technology. However, due to their dependence on a constant flow of energy and data for availability and performance, all electrical appliances are especially sensible to overvoltages and need to...
BSTFLEX fire sleeve make the EN 45545-2:2020 R22/R23 test, and result is HL3, the best one. EN 45545 is a European standard that specifies the “fire performance requirements for materials and product used on railway vehicles” in order to protect passenger and staff in railway vehicles in the event of a developing fire on board. BSTFLEX fire sleeve make test under R22, ...
In order to better support electrical professionals in the Commercial and Industrial sectors, the Sicame Group's CATU and MECATRACTION brands have joined forces to form a new Division, called SBU C&I, whose main mission is to provide electrical safety and tooling connection solutions through partner electrical distributors. Check out our online Solutions for Electrician...
Finder’s 7S Series of modular relays with forcibly guided contacts are suitable for safety applications up to SIL 2 and with this new version with its 5 NO contacts + 1 NC contact comes the ability to control and monitor an even greater number of loads than previous. Particularly suited to applications related to industrial automation with robots, mechanical arms and for...
The local detection of electrical storms is key in preventing occupational hazards. By adopting temporary measures before the lightning strike alert, accidents, damage to infrastructure and property, and even environmental disasters can be avoided. However, it is necessary to have sufficient anticipation time, especially in cases where the implementation time of preventi...
According to IEC1312-1 standard of protection against lightning electromagnetic pulse, lightning surge protection system is divided into four regions, it is divided as follows: LPZ0A areas: cloud-to-function area, is the lightning rod system to protect areas outside the building area, because all the objects in this region are likely to suffer a direct lightning strike...
Surge protection device (surge arresters, surge protectors, SPD) can be connected to between the L (phase), N (neutral), PE (protection line), such as L-L, L-N, L-PE, N-PE, these connections is called protection mode, which has relation of power supply system grounding type. According to IEC61643-11:2005, the grounding type of power supply system can be divided into: T...
Surge protection and the associated surge arresters on the market can be confusing to a homeowner. Understanding the terminology can help. Surge Protection Devices have several names: surge protectors, surge suppressors, transient voltage surge suppressors (TVSS), or secondary surge arresters. But they essentially have the same function of protecting against power surges...
Rogowski coils have many benefits for INSTALLERS, DISTRIBUTORS and OEMs: • reduction of shipping and purchase costs • reduction of stocking costs • suitable to measure currents from mA to hundreds of kA • possibility of installation without interruption on the plant • easy installation in just one click • interchangeable and replaceable • max. accuracy: < 1% accuracy i...
The installation of SPDs inside electrical panels is necessary to protect them from overvoltages caused by direct currents, switching or induced by lightning during storm events. SPDs are classified into: - SPD Type 1: installed inside electrical panels, they protect individuals and equipment from currents caused by lightning and introduced into buildings by overhead p...
We are extremely proud to announce the opening of our new laboratory for flammability tests in Dongguan Ching Tai Electric Wire & Cable (CTi) after long and careful consideration and planning. Product safety has always been a cornerstone of CTi’s product development process for all our LAN networking and audio/video cables. With CTi’s in-house test lab, we are able to pe...
Type 1 Type 1 Surge Protective Device (SPD)s are intended for installation between the secondary of the service transformer and the line side of the service equipment overcurrent device, as well as the load side, including watt-hour meter socket enclosures, and are intended to be installed without an external overcurrent protective device. Type 1 devices are dualrated fo...
The short arc Xenon lamp is a specific type of gas discharge lamp capable of producing bright light with characteristics very similar to those of natural sunlight. For this reason, Xenon lamps find application in highly specialized sectors that need to generate and use artificial light, with a continuous spectrum, as close as possible to daylight (color temperature of 6...
As of now, Georg Schlegel GmbH & Co. KG offers rotary knobs with integrated potentiometers for its SHORTRON and OKTRON-JUWEL series. Apart from these instantly usable rotary knobs, the variants to use your own potentiometer will still be avaliable. These are meant for customers who need resistance values other than the avaliable potentiometers with 1kΩ, 5kΩ, 10kΩ and 50 ...
The usage of USB-C devices in the industrial sector is increasing steadily. So, Schlegel's contribution to this trend are two new USB-C panel mount jacks. Both jacks are designed as USB-C jacks on the front side. The jack RRJ_USB_CA_60 has a 60 cm cable and a USB type A connector on the rear side, and therefore can be connected to devices having conventional USB-A conne...
- Supplement to the range Rontron-R-Juwel - mounting diameter Ø 22.3 mm - easy to clean - degree of protection IP66/IP67/IP69k - suitable for different contact blocks - with illumination and labelling option - defined tactile pressure point - membrane available in different colours
KINTO is specilized in production of flexible copper laminated busbars, which are made with industrial high purity copper foils by press-/diffusion welding or brazing. The flexible connectors are made with copper foils according to DIN EN 13599 with specified thickness. The contact areas can be press-welded which achieves excellent electrical conduction due to perfect m...
Request suitable connectors for your application via the ODU Product Finder. Via the “Free Sample” function you will receive an individually designed sample box. Thanks to ODU Express, worldwide availability of the sample boxes is guaranteed.
Flexible copper busbars are made with copper laminated sheets by press-/diffusion welding. The busbars are made with copper foils with specified thickness. The contact areas are press-welded to achieve excellent electrical conduction due to perfect molecular connection. The contact areas can be bored, milled, machined or coated (e.g. tinned or silvered) according to cu...
SANERGRID® has just delivered two GRAVITYline SGB transformers to the city of Lyon. This range has been specially designed for the French market; it is a range of dry-type transformers that do not contain any flammable dielectric oil and do not require a retention tank or a fireproof tank. This transformer technology is widely used in industry, hospitals, tunnels, supe...
Finder has expanded its range of filter fans for cabinets and electrical panels with versions finished in black, particularly suited to UPS and industrial rack-mounted electronic equipment. These new filter fans in RAL 9004 black are available in 120 V and 230 V AC and 24 V DC versions and boasting extremely quiet operation, minimal size and free flow rates from 24 up to...
