Remote Condition Monitoring is now integrated with ABB’s My Measurement Assistant+ (MMA+) and Genix Copilot AI. Remote Condition Monitoring provides continuous analyzer-health monitoring and reporting, while My Measurement Assistant+ gives users centralized fleet-wide visibility and access to historical device information. While Genix Industrial DataOps provides conextua...
The launch completes ABB’s industrial emission measurement portfolio, bringing together continuous emission monitoring systems, dust and gas flow measurement, and portable hydrocarbon detection in one end-to-end offering. Customers can now source a broader range of emission measurement solutions from ABB, including technologies added through the acquisition of Födisch Gr...
Highlight of ISTA 3N A test procedure specifically designed for similar packaged products in unitized loads for full-truckload shipments within Europe. Based on vibration data measured and collected from European truck simulations on actual European road conditions, using a Power Spectral Density (PSD) of 0.296 Grms to align with current industry testing standards. Unif...
The low-temperature brittleness testing machine is to determine the lowest temperature at which rubber materials do not exhibit brittle failure or the temperature at which half of the test pieces used in a test fail when impacted under specified conditions.Therefore, it is indispensable in the quality inspection of scientific research materials and products, and the cont...
The liquid determines whether transit time or Doppler is viable Transit-time and Doppler instruments both use ultrasound, but they depend on different information in the pipe. Transit time compares acoustic travel in the upstream and downstream directions. Doppler measures a frequency shift from moving reflectors such as suspended solids or bubbles. A liquid suitable for...
GBW-60B cupping testing machine is a specialized equipment for conducting ductility tests on metal sheets and strip materials, and is currently the only equipment to evaluate the plastic deformation performance of metal materials. It complies with the national standard GB/T 4156 Metallic materials-Sheet and strip - Erichsen cupping test, and meets JJG583 Verification Reg...
The application of the device This machine is a precision equipment for conducting process performance tests on metal sheets and strips. It can be used to test the plastic deformation performance of metal sheets and strips during the testing process. It can also be used to test the anisotropy of non-ferrous metal plates. It can also test related materials by replacing re...
With the new SONASCREEN® Sensor, SONOTEC is expanding its acoustic imaging portfolio with a stationary solution for preventive maintenance. Whether detecting leaks or electrical partial discharges, the sensor visualizes acoustic anomalies and can be flexibly integrated into existing systems. Discover the possibilities the SONASCREEN Sensor offers for automated condition ...
In a foundry, temperature at the point of pouring directly influences mould filling and casting quality. Heat loss during transfer and waiting means that a measurement taken at the furnace may not represent the temperature delivered to the mould. KELLER’s CellaCast solution measures accessible molten iron and steel without contact, helping operators monitor these critica...
At the core of the system is the Balanced Temperature and Humidity Control (BTHC) PID intelligent adjustment technology, which enables precise coordination between temperature and humidity regulation. This advanced control method ensures fast response, minimal overshoot, and excellent long-term stability, even during extended continuous operation. The chamber supports a ...
Cupping testing machine, designed according to GB/T 4156-2007, is used to evaluate the resistance of metal materials to the anti-cracking or anti-separation of metal substrates after being subjected to the indentation test under the standard test method; Two-way composite cylinder for measuring metal stretchability. It uses a sphere with a diameter of 20 mm. The steel ba...
First, Device description: In order to achieve the purpose of preparing deep drawing cup round sample, our company provides a pneumatic die feeder, which meets the requirements of GBT24183-2021 "Metallic Materials-Sheet and strip-Earing test", to produce φ60mm round discs, and the thickness range of sample preparation is 0.15 -3mm. Using a single drive source to drive mu...
The Mini Solvent Pump enables the safe and precise dispensing of small quantities of solvents and highly flammable liquids from bottles, canisters and containers up to approx. 10 litres. The compact hand pump operates on the overpressure principle: pressing the pump ball creates overpressure inside the container, which forces the fluid through the delivery hose to the sp...
For analyzing roughness, measuring texture and topography, surface finish or microstructures – on optical components, precision-machined parts, wafers and MEMS. Save up to 30 % on preconfigured Roughness Testers until October 31, 2026: A compact but high-performance white-light interferometer including 10x lens, integrated electronics and vibration isolation, optional XY...
SHINING 3D Metrology announces the launch of FreeScan Trak Nova+, the upgraded generation of its FreeScan Trak Nova wireless multi-functional dynamic tracking & scanning system. Building on the proven performance and market success of the previous generation, FreeScan Trak Nova+ introduces key enhancements designed to further improve scanning efficiency and productivity....
1.Product description The measurement and control system adopts high-precision digital servo valve, which has the function of force closed-loop control, which can realize equal load rate loading or equal stress rate loading. High control precision and good reliability, fully meet the requirements of GB/T 17671 "Test method for cement mortar strength (ISO method)",Using m...
1.Usage This machine is widely used for compression test of all kinds of corrugated carton compression strength and pressure of stack, the performance parameters and technical indicators meet the standard of ISO2872 <Packaging-Transport packages Compression test method>, ISO2874<Packing-Transport Packages-Using Compression Test for Stack Test> and GB4857.4 <Basic Tra...
Metrohm introduces OMNIS IC, the next-generation ion chromatography system designed to combine maximum flexibility, automation, and reliability on a single analytical platform. Built on a modular hardware concept and powered by intuitive software, OMNIS IC addresses both current and future analytical demands while ensuring efficiency and reproducible results. Modular de...
SCANOLOGY has introduced two new optical tracking 3D measurement systems, TrackScan Sharp-Z and TrackScan-Go, expanding its solutions for both large-scale and small-part inspection. TrackScan Sharp-Z combines long-range optical tracking with high-precision 3D scanning for large components, while TrackScan-Go provides a compact solution for flexible measurement of small a...
A flash point apparatusreports a method result, not a universal temperature. See how closed-cup Tag, Pensky-Martens and Abel Flash Point Testers differ for fuels and solvents. Labs treat flash point as if it were a fixed property, like density at 15 C. It isn't. A flash point apparatus is measuring a procedure: a cup of a stated size, a lid that either traps vapor or l...
The Austrian instrumentation specialist eralytics has expanded the technical capabilities of its eraspec oil, a portable, stand-alone FTIR lubricant analyzer. Designed to deliver laboratory-grade precision directly on-site, the analyzer utilizes a fully automated, solvent-free workflow with an integrated sample pump. To address increasingly demanding field requirements, ...
Bronkhorst, specialist in low-flow measurement and control technology, introduces the new CORI-FLOW™ MN-Series, the fourth generation of its Coriolis mass flow meters and controllers for liquids and gases. The new series combines the proven benefits of direct mass flow measurement with an extended flow range, advanced electronics, and enhanced connectivity for easy integ...
The PharmaPicker from Bürkle GmbH enables the targeted and precise collection of even the smallest sample quantities. Manufactured from high-quality stainless steel, this sampler has been specially developed for targeted sampling of free-flowing, powdered and fine-grained substances. It is suitable for a wide range of applications in the pharmaceutical industry and where...
As photovoltaic technologies continue to expand into the building sector, both BAPV (Building-Applied Photovoltaics) and BIPV (Building-Integrated Photovoltaics) place higher requirements on product safety, durability, and long-term performance. Our testing equipment is developed to support these applications, ensuring accurate evaluation of PV modules under various envi...
SCANOLOGY has expanded its CNAS-accredited laboratory capabilities under ISO/IEC 17025, adding testing according to ISO 10360-8 and ISO 10360-12. The laboratory now provides accredited testing and calibration services across optical 3D scanners, photogrammetry systems, articulated arm CMMs, and tracking-based measurement probes, supporting quality assurance, audits, and ...
1.Equipment Name and Model JYAW-1000 Computer Control Electro-hydraulic Servo Well Cover Compression Testing Machine 2. Usage This machine is designed to test the well cover bearing capacity, according to the standard CJ/T3012-1993<Cast Iron Manhole Top>, CJ/T121-2000<Composite Material Inspection Well Lid of Regenerated Resin>,JC889-2001<Steel Fiber Reinforced Concrete ...
1.Usage GYB-2000 computer controlled electro-hydraulic servo steel pipe compression testing machine is specially used for the compressive strength test of steel pipe flattening test. Fully meet the ISO 8492:2013 Metallic materials -- Tube -- Flattening test. 2.Main Technical Parameter Max. Test Force 2000kN Indication accuracy ±1% Test Force Resolution 0.01kN Hydraul...
A textile sorting machine that combines artificial intelligence (AI) and near-infrared (NIR) spectroscopy is central to scaling textile recycling. These systems help recycling facilities identify fibres, improve material purity and increase textile waste processing capacity, making high-quality recycling more efficient and economically viable. What it is. A textile sort...
1.Usage This machine is mainly used for the compression strength test of brick, stone, cement, concrete, etc, also it can be used for other material’s compressive performance test after equip special fixture. 2.Main Technical Parameter Max. Test Force 2000kN Accuracy 1 grade Test force Measurement Range kN 2%-100%FS Test Force indicating Error ≤indicating value±0.5% ...
I. Application The machine according to EN 124 “Gully tops and manhole tops for vehicular and pedestrian areas”, CJ / T3012-1993 "cast iron inspection covers", CJ / T121-2000 "recycled resin composite material inspection covers" and JC889-2001 "steel fiber reinforced concrete inspection covers", GB / T 23857-2009 "inspection covers" Industry or national standards for the...
The micro powder spatula, made of corrosion-resistant stainless steel 1.4301 (304), is ideal for use in chemical, pharmaceutical, and analytical laboratories, where precise and safe processing of small quantities of powder is necessary. Typical applications include preparing samples for spectroscopic analysis, weighing sensitive substances, and working in narrow vessels....
MALiS - High-precision synchronous process in Z MALiS is your high-precision Z-positioning solution for coarse adjustment with repositioning and parallelism in the micron range. The system is used in life science, 3D printing, materials testing, photonics, and research and development. Freely configure your application and combine MALiS with various XY positioning syst...
Industrial doors play a much more important role than it seems at first glance. They not only allow the passage of people, vehicles or goods; they also contribute to organising workflows, separating areas with different environmental conditions, improving safety and ensuring the continuity of production processes. In a logistics warehouse, a production plant or a distrib...
Overview: It is mainly used for the reciprocating compression test of foam polymer materials, and measuring the residual deformation rate, so as to know the material's dynamic fatigue characteristics. The number of tests, the display force value and the impact frequency can be freely set. The whole machine is easy to operate and easy to maintain. With high reliability, a...
1.Machine model and name: YAW-300S automatic exhaust duct compression testing machine 2.Application: This testing machine is mainly used for the test of pressive strength of duct finished products, which is applied to the standard for the JG/T194-2006. 3.Main technical specifications: 3.1. Max. Test force: 300kN 3.2. Test force measuring range: 4%-100%FS 3.3. Test fo...
Semi-Automatic VMB Gas Cabinet With Semiconductor Valve Manifold Box Diaphragm Valves And Gas Pressure Regulators In semiconductor manufacturing, handling hazardous gases safely and delivering them precisely is essential. The semi-automatic VMB gas cabinet is a key system designed to meet these needs. VMB stands for Valve Manifold Box, and this cabinet combines advanced...
