few distinctive features, such as the presence of a valve status diagnostic system and the creation of a double communication channel guaranteeing redundancy of the architecture. The simplest version is obtained from a pneumatically-operated 3/2 monostable valve. It is well known that when this type of valve is in the idle state (coil de-energized), port 1 is not co...
Ideal for Vacuum Distillation, Vacuum Crystallization and Tank Blanketing Fletcher, NC — Equilibar announces its ground-breaking HV high flow vacuum control valve, targeted for applications with high flow rates and small differential pressures. The HV is a pilot operated vacuum regulator. Pilot operation enables the HV to respond quickly and automatically to accurate...
CHARLOTTE, N.C.–HAWE Hydraulics is a leading global manufacturer and supplier of sophisticated hydraulic components and controls for the mobile, industrial, and renewable energy markets. The new axial piston pump, type V40M-028H from HAWE Hydraulics is ideal for hydraulic fan controls in mobile machines. The pump will displace volumes up to 28cm³/rev and is designed f...
EHEDG certificate CIP and SIP capable Perfect for drinks and foodstuffs From low to highly viscous Hygienic, gentle conveying Abrasion free Available completely in stainless steel Pressure relief valve can be integrated Aseptic connections according to DIN 11864 Easy replacement of the seals Independent of rotation direction Typical aplications / Pumping media...
The most convenient solution so far is the installation of line blinding systems which are permanently flanged or welded into the line and which negate the need for the spreading of lines. Fetterolf Corporation introduced the first bolt free line blinding system, the Cam-Set®, years ago. Easily opened by turning a hex nut, the heart of the system – the cam mechanism – gi...
Like all Penta production, SAT CRIO valves have been designed for the handling of cryogenic media with temperature between -200°C and +200°C, when valves are equipped with seat in KEL-F, or between -100°C and +700°C, when they are equipped with the unique self-lubricant seat manufactures in our special material “ Pentafite”. SAT CRIO valves are available with floating o...
These ball valves are available from size DN25 to DN150 with DIN EN 1902-1 PN16 flanges. The body material is spheroidal graphite cast iron with a full port design. This gas ball valves are approved according to PED and are used for all gases according to DVGW G260 / G262 or every other non aggressive gas (others upon request). For more information please get in contact ...
There are now four different sizes in the pump family with displacement volumes up to 8 in3/rev, working pressures of up to 5800 psi and peak pressures of up to 6500 psi. All built with swash plates, they provide the required displacement volume without over or under dimensioning the pump output. The V60N-130 is designed for high pressure and high volume, and se...
Special feature is its electric actuator which allows an automatic control of the flow rate of the pump from 0 to 1000 L/h. Typical application is automatic pH adjustment. A probe measure pH on discharge line, according to values the PLC send a command through a 4-20 mA signal to the actuator, which automatically changes flow rate of the pump so modifying final pH of...
The column parts are designed and equipped and manufactured to customer specification, up to DN 600 and in section lengths of up to four meters. Our delivery program includes column sections, column bottoms, separator vessels as well as accessories and re-glasslining. Comprehensive internal testing to DIN, ISO, factory standards and company–specific regulations as well...
for ion implantation applications. The sophisticated rotor design of the turbopump results in an optimized pumping speed for light gases. This ensures very good process adaption for ion implantation processes, were hydrogen is the most accumulating gas. With 2,750 l/s pumping speed for hydrogen the new HiPace 2800 IT is the best turbopump in its class. The intellige...
Veljan Vane Pump – TXB. Our new TXB single vane pumps are well suited for both industrial and mobile applications. The low noise pumps have increased mass and thick housings to make the pumps more durable. Veljan TXB single vane pumps are available in 12 displacement sizes: B02, 03, 04, 05, 06, 07, 08, 09, 10, 11, 12, 14 with flanged or threaded ports. Maximum pressure:...
The new Hägglunds CA 10 to 40 motors are smaller and lighter, but offer the same output. This gives them unmatched power density, with the unique ability to deliver full torque and full speed simultaneously. Torque ratings for the four available models range from 1,945 to 9,720 Nm with speeds ranging from 250 to 350 rpm. All four models are rated for 250 bar. The new mo...
Available in pin-pin and trunnion mounting options, Muncie Power Products single-acting telescopic cylinders are designed to meet various application needs. Muncie Power’s pin-pin mount cylinders are one of the lightest cylinders on the market and have low maintenance requirements for years of top performance without additional expense. These features translate into gre...
Replacing the previous DS1 model, the new Rexroth DS2R electrohydraulic controller features proportional valve technology for more reliability, easier maintenance and lower cost. The controller is fitted directly to the secondary control unit – axial piston equipment that can serve as both a pump or motor to effectively manage variations in torque on winch drives in rot...
The aim was to develop a reliable pump with an exchangeable fluid impelling part which, due to its modular construction, is capable of conveying a variety of fluids in parallel. The new pump system meets these demands. Basic model with two to five flow channel The basic pump has a maximum of five independent flow channels. This guarantees that in each channel a defin...
Stauff has further expanded its range of replacement filter elements for single, double and automatic filters “made in Germany”: Multi-mantle filter elements from the SBM range, which are now also part of the filter manufacturer's stock range, consist of up to three cylindrical filter cartridges with different diameters placed inside each other, creating the largest poss...
The AG Series is equipped with standard JM and JP motor frames along with a stainless steel shaft sleeve to prolong the life of the pump. They are available to fit models ranging from 3 to 75 hp, with flow ratings from 50 to 1,000 GPM, with a maximum shut-off pressure of over 175 psi. Optimized via CAD modeling and simulation, the pumps' updated flow design offers improv...
GG25 body - Epoxy coated - ISO pad Max. pressure:16 bar up to DN300, 10 bar above Temperature range with EPDM seat: -10°C/+110°C (temporarely +130°C) Gearbox recommended above DN200
Perfect emptying and dosing results are based on easy handling, in combination with a hygienic design. Barrels can be emptied almost completely (less than 1% residual material in the barrel) and fillings offer a high repeatability with less than 1% deviation. ViscoTec systems have proved their worth: They are deployed successfully for cosmetics like cream, peelings, ...
Key benefits of magnetic drive: •Ultimate protection against leakage •Minimal maintenance •High safety •An economical solution •Low life-cycle costs •Gentle liquid handling •No dynamic shaft seals – minimal risk of leakage As only minimal maintenance is necessary, ROTAN® ED pumps are a very economical solution compared with traditionally sealed pumps, especia...
As a leading provider of water and wastewater equipment, Smart Storm needed a pumping solution which offered reliability, accuracy and the ability to lift trade effluent up to 7 metres, prior to it being measured and analysed, without a secondary pump being required. The company chose Verderflex R3DC OEM peristaltic pumps to fit the bill, as these compact, easy-to-mainta...
- VACUUBRAND chemistry diaphragm pumps with head cover and diaphragm clamping disc in stability core design for unmatched durability and chemical resistance - 100 % oil-free vacuum by hermetic separation of the pump chamber and the drive to avoid any contamination - minimal energy consumption by VACUUBRAND VARIO® technology and modern permanent magnet motors – GREEN VA...
Thanks to the miniature design the size, weight and material of overall systems can be significantly reduced. Therefore, the valve is mainly applied in portable devices, such as metering or sampling equipment. The ease of integration, with a width of only 15 mm, enables use as block valve in applications where parallel media handling is required. Currently, the valve is...
Customer benefits Easy to maneuver & transport - thanks to its relatively small size, the range can be towed behind a car and is easy to maneuver both on and off site. Full shift fuel autonomy - Being compliant with the stated emission regulations, this range is specially designed to run a full shift without the need to refuel. Easy to operate - the controll...
To keep up with this growth, construction companies must come up with new building equipment to match ever-increasing challenges. One such machine is the portable concrete pump from Chinese construction machinery manufacturer Zoomlion, Changsha City, Hunan. It reaches up to a height of 101.18 m, which even attracted interest from Guinness World Records. Apart from its sh...
The pumps deliver superior performance and are available with unique design features, including flexible multi-port connections providing up to 25 installation options; maintenance in place, reducing downtime by 25% and required parts by 30%; innovative flange design, providing a well-defined diaphragm clamping mechanism for consistent lifetime wear; and high-efficiency ...
Engineers at Moog, East Aurora, NY, developed the RKP 250 radial piston pump, in part, to let customers pump more volume using a smaller motor with a simplified interface. The RKP 250 also lowers energy costs, compared to two-pump configurations, which has been a popular method to increase the volume of hydraulic fluid pumped prior to the RKP’s arrival. The 520-lb pum...
Multi-station gauge isolator valves of type SWS-M from Stauff allow the measuring of the operating pressure in hydraulic systems on up to six different measuring points in the system with only one display device. This is generally an analogue or digital pressure gauge. The measuring point to be monitored is selected by turning the knob on top of the component. This allow...
In comparison to external variants, the integrated pilot valve offers both functional and economic benefits, such as fast reaction times, automatic programming of end positions and lower compressed air consumption. Local programming of the end positions is also possible without a connection to the control unit and without opening the housing. The combi switchbox is desig...
new HPX2800 has been designed to replace the previously available XHP2800, and whilst various key features remain the same, the new HPX2800 offers additional features, most notably the inclusion of a gauge kit as standard. The HPX2800 pump is suitable for a wide range of high pressure applications, such as oil injection for bushing removal, valve testing, calibration ...
Comet is rapidly expanding business and is also making notable investments for its development by acquiring leading trade companies. The result is that today Comet's branded pumps represent international excellence that meets with the appreciation of the whole industrial sector. The new models are: - TW 13022 S: 1450 rpm, 48.5 l/min (12.7 US gpm) @ 150 bar (2175 psi) ...
With the introduction of the new tube valve body, Bürkert completes its product line in the diaphragm valve area and presents a high-performance alternative to forged and cast valve bodies. With cleanability certified in accordance with EHEDG, high stability, ideal surface quality, and the use of 316L stainless steel, the tube valve bodies manufactured with hydroforming ...
silent – compact – mobile The versatile compressor station for laboratories and clean rooms The SICOLAB oil-free compressor system was conceived by Dürr Technik, specifically to be stored and used at the technician’s workbench. This is now possible, due to its extremely quiet, vibration free operation, and the compact size. The SICOLAB has an appealing, modern l...
You can use the nozzles espeically for the start up of the gas train or when it comes to pumping of the regulators in the low load flow range. With the noise reduction systems you can reduce the noise about aprrox. 10 dB. Both options are immediately available, please get in contact with us for further information.
Under our brand DRAC DT we offer a wide range of strainers, valves and accessories to the industry. We also have our engineering and production departments able to offer to our customers the possibility to make custom designs according to their needs, while offering constructions in all kinds of special materials with tight deadlines.
