Fast-running pumps and unhardened hydraulic materials are poorly suited for such challenging tasks. Furthermore, rubber coated cast iron pumps don’t often present an alternative for sand grit pumps in continuous operation, as once the rubber coating is damaged, the soft cast iron is directly exposed to the sand particles and the abrasion then proceeds very quickly. Egge...
centrifugal pumps with single impeller are able to offer high flow rates, provide smooth, nonpulsating delivery, and regulate the flow rate over a wide range without damaging the pump. For the correct functioning of the pump, use clean water, or non-aggressive liquids charged with small solid impurities. To be used in flow irrigation system in gardening, agriculture ...
While the series RS250 is a cost optimized version available in sizes DN25 to DN200 with standard KG-values and flow rates the series RS251, available in DN50 to DN100 is optimized for very high flow rates. Both series are available with an inbuilt safety shut off valve and available standard delivery time of 2-3 weeks (EXW). Do you have any further questions? Dont hesit...
air. To ensure this, many paint shops today applying waterborne paints and supplying the breathing protection equipment of their painters with clean air are already employing the SATA filter 484 system. In addition to a cyclone separator with sintered filter and a fine filter stage, this three-stage filter regulator unit is also equipped with an activated charcoal f...
Diaphragm structure Max Operation pressure:15MPa Connections:DIN, CGA. ISO, BS Any special requirement pls let us know For corrosive gas cylinder We are specialized in producing pressure regulators for calibration gases, specialty gases, non corrosive gases, and corrosive gas. Should any questions, pls let us know.
Feature: ● DC brushless motor with energy efficiency technology by micro processor ● Soft start at very low in-rush current, good convenient working directly with PV panel ● Durable permanent magnetic rotor/impeller and fine ceramic shaft ● Advanced magnetic drive technology for static-impeller, without any leakage for ever ● Long life brushless pump, ideal life fo...
You find these systems in a wide range of uses both in stationary and mobile applications in agricultural engineering, materials-handling technology and mechanical engineering. Because of the integrated distance sensors the hydraulic cylinders can be used as normal hydraulic cylinders and no special protective measures are required. The distance sensors need hard...
Possessing an inside diameter that ranges from 6 to 38mm, this hose can withstand a minimum temperature of -20°C and a maximum of +60°C. Its typical applications include pressure hose for compressed and and a conveyor for gaseous and liquid substances. Highly versatile, the J 7-1 is constructed with a fabric that is installed within its smooth interior. It possesses a ti...
Our TL-C series design features micro centrifugal pumps powered by brushless DC motors. They are designed to be cool, quiet, compact and lightweight. A variety of features, including a seal-less design to prevent leakage, wide range of working voltage, stable performance, long life time, enable the pumps to meet a full spectrum of user needs, with emphasis on ease of ins...
The project of the FLUIMAC’s double diaphragm pumps, it has been mainly developed around the air distribution system, the diaphragm’s high technology, the pumping chambers geometry and the valves system; this in order to extend the functionality, not only for transfer but also for dosing. The result is an innovative product with next-generation solutions. FLUIMAC’s dia...
Performances tests were carried out by the CSTB: - The anti-smell valve has a water-flow of 60l/s - It is 99% air tight Tests reports can be downloaded on our website www.norham.fr (French only)
For series R-0, body and restrictor are made of FDA approved polycarbonate. For series F950, body is made of polysulphone. The restrictor is a sapphire. Restrictors are supplied with filter made of stainless steel mesh. Different connection nipples from size 2.3 mm, 2.7 mm and 4.7 mm are available, also restrictors with orifice from 0.08 up to 0.3 mm. Potential oper...
One is air dryer , and another one is humidification modules. This product is precision air humidity control unit using these modules. The size of the box which this unit can control is until 150L. And setting humidity range is 5-40%RH. This is used for the making of environment to perform various examinations and analyses in a stable state.
PPMA is an annual show dedicated to processing and packaging machinery and will be stage chosen by Meler to showcase their new range of Zero Cavity modules, perfect for any application that requires absence of adhesive strips. These modules have been designed to prevent clogging and eliminate small impurities automatically. They are resistant and capable of withstanding ...
The GEMÜ 567 is a 2/2-way globe valve with a regulating needle or regulating cone for high control accuracy and precise dosing. The valve seat on both versions is sealed using a soft-seated seal. The actuator is separated from the media-wetted area by an FDA-compliant PTFE diaphragm. This ensures a permanent, temperature-resistant seal and thus meets the high requirement...
Now WALTHER-PRÄZISION unites all the necessary elements for both confusion-free and electronic process monitoring/control in the clean-break CN range. The couplings are designed in accordance with the poka-yoke principle in which a multiple coding pin system in the locking section prevents confusion mechanically. The couplings get their intelligence from RFID sensors. Th...
These solenoid valves are in compliance with ATEX 94/9/CE standards and are suitable for the use in potentially explosive atmospheres, This group valves with a special coil for the applications in potentially explosive ambient (group II), that fulfills the requirements of EN 60079-0, EN 60079-18 and EN 60079-31.
Vetter industrial lifting bags 8 bar (116 psi) are characterized by their noiseless, bump-free and smooth lifting of the most heavy loads. They lift, press, compress, brace and cleave – even in angled positions. Inflation of industrial lifting bags can be made with air as well as water. Accessories necessary for inflation can be individually put together. Industria...
These filters are suitable for gases in accordance with DVGW Code of Practice G260/262 and all other neutral and non-corrosive gases. (other gases on request). The filters are available in sizes from DN25 to DN200 with maximum inlet pressure of 1 bar.
Trying to fulfill all customer’s needs BVA designed a wide range of Air Hydraulic Pumps. All of them with a high strength reinforced alloy aluminum reservoir, light weight and corrosion resistant. Also, all the pumps have an internal pressure relief valve for overload protection, and a suggested air pressure range of 8-14 bar. Designed to be used with single acting cylin...
Both are compact valves with pilot operated piston and TM35 type coil. Valve seat diameter is 6 or 7 mm and ports are G1/4 or G3/8. Valves are available in brass or stainless steel body, with PEEK main seal (piston) and O-rings in NBR, EPDM or FPM. Minimum pressure differential of 0.5 bar is required and maximum operating pressure is 100 bar. Valve design and choice of m...
The types of media it works with include nitrogen and compressed air. Maximum operation pressure is 58psi or 4bar, and operation temperature is 41 to 122 degrees Fahrenheit (5 to 50 degrees Celsius). Oil-free, this gun can be used in clean rooms.
The draft of the FLUIMAC''s double diaphragm pumps, it is mainly developed around the air distribution system, the diaphragm''s high technology, the pumping chambers geometry and the valves system; this in order to extend the functionality, not only for transfer but also for dosing. The result is an innovative product with next-generation solutions. FLUIMAC''s diaphra...
Advantages •Hygienic and compact design •Ball bearing free •Self-cleaning •FDA conform •Optional ATEX exempt •Fits through 3 inch diameter opening •Economic flow rates •Easy-to-maintain •Reproducible cleaning by monitoring of rotation Applications The hygienic and compact design combined with the high power jets, makes it perfect for cleaning a variet...
The new AB550M gearbox is manufactured as standard with cast iron housing components, high performance axial thrust bearings, a protected steel input shaft and a polyurethane coating to deal with arduous applications and aggressive environments. The ability to support electric actuators weighing up to 46 kilograms and input speeds of up to 72 rpm offers suitability for m...
Ambient Temp : -20° ~+60° Nominal Pressure : 1.6MPa Control Air : Air Air pressure :0.3~0.8MPa Size :DN15-DN50 Valve Body :CF8/CF8M Valve Seat :PTFE Valve Stem :304 Sealing O Ring :NBR The Angle Piston Valve can be used for industries dealing with food and beverage, textile dyeing and bleaching, hospital and pharmaceutical purposes, and industrial wash...
1.Directly connects to photovoltaic panel, start-up power requires less than 2 Watt 2.Ideal 5W, 10W, 15W, 25W power consumption optional for different sizes SWH systems 3.The exclusive food grade stainless steel solar DC hot water pump,keep far away Plumb danger more safe, protect your families’ health 4.Operates on safe DC power, you will not expose yourself to hazar...
These Horizontal split case pumps are of Single stage, double suction, split volute, centrifugal Non-self priming type with radial suction & discharge ports. The split case design of these pumps enables easy removal & dismantling of bearings, wearing rings, Impeller & seals without disturbing the pipeline & motor. Pumps can be supplied as such without mo...
The new Timer P992364 is a practical and easy tool to set-up, developed to satisfy the increasing demand of timer systems of the industrial plants. Thanks to its easy mounting directly on the coil, this new timer can be well applied in condensate drain systems control and solenoid valves timed control in complex systems. The new timer is provided with electrical protecti...
Flottweg can look back on many years of history. In 1932, Dr. Georg Bruckmayer first purchased the rights to the protected name "Flottweg" to found the Flottweg Motoren-Werke. Flottweg initially manufactured engine components for motorcycles and aircraft. During the Second World War, due to the bombardment of Munich, its original headquarters, the company moved to the Lo...
Standard equipped with one interchangeable saddle adaptor, provides 20mm more extended height. Low profile mini jack, with a minimum height of 60mm, lifting range of 20mm, and maximum height of 80mm has a capacity of 5 Ton. The BVA Mini Jack is ideal for working in small spaces with heavy lifting work. Has a side pump mechanism with smooth operation. The BVA J11050 Mi...
The ISO 5599/1 valves, which are intrinsically safe and reliable, have been upgraded with some distinctive features, including a diagnostics system that monitors the state of the valve and a double channel guaranteeing system redundancy. The basic version is obtained from an electro-pneumatically controlled 5/2 monostable valve. When the coil is de-energized, the spo...
Especially with systems like flame cutting machines or automated pigging, a different solution is required. In these situations, the PF series proportional valves offer the best performance. Operating as a slide valve controlled directly by a proportional solenoid, it lets you regulate the pressure exactly at the flow rate. The PF series valves are of course also well-...
The Model 1006SS Back Blow Air Nozzle is manufactured with a small profile and will fit inside openings as small as 7/8″ and is effective on diameters up to 4″. It is constructed of type 316 stainless steel to provide durability and superior resistance to corrosion. Installation is simplified and a secure fit is assured with 5/8″ flats milled on the body. Since airflow i...
The contec® GmbH Industrieausrüstungen GmbH from Bad Honnef is a leading supplier and manufacturer of air and gas filtration, liquid filtration, oil mist filtration and filling level measurement equipment. For the application in oil mist filtration, contec® had a filter element tested by the Institute of Energy and Environmental Technology e. V. (IUTA) in Duisburg in acc...
The MH1300 series are designed to work with clean water in domestic applications, irrigation, industry, etc. the pump body is made of stainless steel, so that they are of beautiful design. at the same time, they have the advantage of low noise, easy operation and reliable performance. Pumps should be installed in a covered area, protected against the weather. Operati...
