Product Trends

The new features include increased speeds for the IQT3F Pro electric modulating actuators, independent open/close speeds for part-turn actuators and closed-loop control for the multi-turn and part-turn actuators. The optional increased speed for the IQT3F Pro electric modulating actuators is available for sizes 50, 100 and 125. Adjustable speed, including a slow mode fo...

The LASER series compression units are designed for intensive use, and are known for their high efficiency. Compact and quiet, they have been specifically designed for laser cutting industrial environments, which therefore require air flow rates at high operating pressures. Use of the LASER series Onair systems therefore allows to cut by air, thus avoiding the use of nit...

The gigafactories being built around the world to meet the huge demand for lithium-ion batteries in the automotive, electronics and semiconductor industries require a large number of pumps. In battery production, chemical resistance and chemically compatible materials are required to avoid contamination of valuable raw materials. During the critical process of formulati...

Danfoss’ SLP13 valve reduces power consumption from 29 W to less than 10 W, which can help extend run time in battery-operated vehicles. By reducing power consumption, the stabilized temperature of the valve’s new coil has been reduced by nearly 50%, which helps prevent coil burnout and enables longer service life. The SLP13 valve features a lower pressure drop than pre...

Designed to integrate directly into the manifold of a Wilden metal air-operated double-diaphragm (AODD) pump, ISD Series dampeners reduce fluid pressure and flow fluctuations inherent in AODD pumps, providing a smoother discharge flow and maximum process fluid containment. The function of a Wilden ISD Series dampener is critical in applications that need to minimize vib...

Designated as ‘J’ for drainage and ‘JS’ for sludge, the new J4, J7, JS4, JS7 and JS8 models offer flowrates from 5.5 l/s with heads up to 16 m. Their slim design and low weight of construction make them easy to transport between locations and set up for work. Stainless steel construction ensures long-term reliability against erosion and corrosion. The pumps are designed...

Lee Ventus says that this extended service life means that LT Series pumps can serve ever more-demanding applications, with the pump able to support 2 years of continuous use. “During testing, pumps are driven in an elevated environmental temperature of 40°C (104°F) and against a restrictive load that limits the amount of airflow (and therefore cooling) through the pump...

The MSN-RO high pressure pump range combines proven features from existing Sulzer designs with multiple enhancements to optimize both capital and operating costs. Sulzer’s AHLSTAR range of charge pumps has also been extended with increased capacities suitable for modern large-scale desalination projects. The Sulzer MSN-RO high-efficiency pump is designed for modern, lar...

The UK manufacturer said the refueller was part of its £100 million investment in hydrogen engines, which has so far created working prototypes of a backhoe loader and Loadall telescopic handler. The mobile hydrogen refueller aims to provide an easy way for customers to refuel machines, the vast majority of which have fuel delivered to them while working on site, said t...

While the standard OHLA product line is designed to handle high loads at high operating speeds, these new Extra-Duty models are designed to maximize performance in the most demanding applications. They provide a solid, permanent mounting surface eliminating premature motor or pump failure due to axial and radial overhung loads on a motor or pump shaft. They feature these...

Valves that control process and auxiliary media reliably and precisely are an important component in the digitisation of process plants. Schubert & Salzer Control Systems are now offering the latest generation of their tried-and-tested 8049 digital positioner for pneumatic control valves with IO-Link. Important diagnostic data from controller and valve are thus available...

Last year, the EU adopted a European Climate Law with the aim of reaching net zero greenhouse gas emissions (GHG) in the EU by 2050. The law sets an intermediate target of reducing GHG by at least 55% by 2030 compared to 1990 levels. This falls in line with actions taken in 2019 by the EU Parliament to reduce CO2 emissions from heavy commercial vehicles by 30% compared w...

The unit was developed for low voltage mobile applications and is ideally suited for the needs of hybrid equipment builders facing spatial constraints. The system includes a Flo-Torq gear pump packaged with an axial flux motor and controller from Omni’s Magelec subsidiary. The overall package length of 299.7 mm (11.8 in.) offers equipment designers a compact form to powe...

Parameterizing and reading out hydraulic valves with a smartphone and Bluetooth It takes advantage of the economic benefits of digitalization with no additional cabling. The new generation provides the open interfaces Bluetooth and IO-Link. In conjunction with a suitable app, commissioning engineers, operators and service technicians can access components and change par...

We are driven by a desire to make the tried-and-tested increasingly better. Thanks to systematic further development, Egger is proud to launch a completely redesigned and technically revised Iris® diaphragm control valve onto the market; we name the new model generation “IBS”. The new IBS will be presented to a wide audience for the first time at this year’s IFAT in Muni...

The one-year challenge The challenge was clear. An American roofing shingle manufacturer’s new corporate “reliability engineer” reached out to DESMI. He was looking for an alternative to the filled asphalt pumps that his company had used for years from another supplier. He had been going through the factory’s equipment to determine which products were the least reliable...

A topic that has received a notable success, following a progressive electrification of actuators and drive motors, is the thermal management and it is still one of the most discussed topics by designers. The dispensing of thermo-conductive pastes has soon became a forced choice for several reasons: to automate the assembly process; to dissipate and to keep under contro...

Vehicles that do not produce emissions such as CO2, carbon monoxide or nitrogen oxides, but rather water vapour and heat as a waste product, and can also be refuelled in just three minutes – sounds like the science of tomorrow! These are the advantages of the fuel cell technology of today, however. That is why it is seen as a key technology for an emission-free future, ...

Industry 4.0, Internet of Things (IoT), cloud, machine-learning and predictive maintenance - all terms that are now an integral part of the industry. In dewatering by means of decanters, digitisation also offers opportunities which HILLER is using and can therefore offer its customers high added value. Predictive maintenance, condition monitoring of the centrate, automat...

On a mobile platform the compact DecaSmart from Hiller is immediately ready for use for all dewatering tasks. As a ready-to-connect compact unit the decanter DP45N with the corresponding periphery is completely installed and pre-assembled on a steel platform. Thus the decanter unit can be easily integrated into any existing system with plug & play. So simply connect ...

1. OPERATING PRINCIPLE OF THE HILLER LYSATE TECHNOLOGY The mechanical cell disintegration of waste activated sludge using Hiller lysate technology optimizes the anaerobic sludge treatment in wastewater treatment plants. This is achieved by installing a so-called lysing device at the decanter discharge. It is a combination of knives which circulate in a housing with ...

The range of Dredge and Gravel pumps is designed specifically for continuous pumping of extremely aggressive slurries, with a wide particle size distribution. Capable of handling large particles at consistently high efficiencies results in low cost of ownership. The large volume internal profile of the casing reduces associated velocities further increasing component lif...

The industry-leading range of 530, 630 and 730 peristaltic pumps from Watson-Marlow Fluid Technology Group (WMFTG) is now available with EtherNet/IP™ control. The availability of this increasingly popular, non-proprietary industrial network protocol provides pump users with access to fast, accurate performance data and seamless connectivity to modern PLC control systems ...

Valves in food processing plants are often exposed to aggressive process conditions. Since CIP and SIP processes are common in these plants, the seals must be able to withstand aggressive media and higher temperatures in some cases. Therefore EBRO ARMATUREN now offers an FDA compliant hydrogenated acrylonitrile butadiene rubber (HNBR). The elastomer is suitable for miner...

The MCR8T represents the latest development in direct drive CTL track motor technology and, by utilizing the next generation of rotary group design, delivers a step change in power density and durability. The new rotary group design offers up to 55% increase in maximum torque, enhanced durability and a 20% increase in flow capability compared with the existing and dimens...

Pneumatic vane motors Air vane motors are made up of a cylinder (called a stator) containing an eccentric rotor closed at both ends. The space created between the stator and the rotor is kidney-shaped. The rotor has grooves in which the vanes can move freely. The compressed air feeds into the motor at one end and escapes through an opening in the cylinder. To ensure t...

These pumps feature medium-high working pressure capabilities that meet a wide range of applications. According to the company, they feature simple construction for long, dependable service; and they are more contamination-tolerant than competitive pumps to improve dependability and reduce maintenance costs. The efficient, energy-saving design is also economical, with...

The capabilities of these proportional-directional valves have now been extended, thanks to the new actuation option: CAN Lite. The company said it offers an ideal and cost-optimized entry into CAN bus communication in many mobile machines. It’s particularly suited for manufacturers that are interested in quick commissioning, thanks to low cabling effort and preset opera...

The product is readily integrated into modern, energy efficient systems and features flexible assembly with no transition plate needed between the two distinct sizes. The new RM10 and RM15, with flow rates of 90 and 150 lpm respectively, are cost effective, compact, general purpose, multi-application load sense directional control valves from Bosch Rexroth, optimally ...

Qdos chemical metering pumps from Watson-Marlow Fluid Technology Group (WMFTG) now feature four configurable outputs to help users cut down on the need for additional PLCs and provide extra flexibility when communicating with SCADA or other external monitoring systems. By listening to customer requests regarding new functionality, WMFTG has expanded its accurate and v...

Relief Valves, Check Valves, Needle Valves, Fittings, Manifolds and more. As an essential business we remain open and ready to help during this COVID-19 crisis. Check out our website: www.valvecheckinc.com Call or email (sales@valvecheckinc.com) for a quote 1081 Highway 36 East, Suite 1 • Maplewood, MN 55109

The XP185 can simultaneously power both air and electrical tools when outfitted with an optional 4kW generator. The machine is equipped with two 120V duplex outlets with access on the curbside, rear panel of the air compressor. The new air compressor uses a 74-hp Tier 4-Final engine with a diesel oxidation catalyst after-treatment system. The XP185WDO is designed to deli...

LIVIC supplied XF series Automatic Back-flushing Filters for a 1.18 MW Hydro Power Plant for the cooling system. XF Series Automatic Back-flushing Filter (XF Filter for short) has metal filter cartridges inside. When filter elements are clogged, a specially designed back-flushing arm will clean the elements one by one. When filtering, the water enters the element from...

Long system downtimes due to increasing maintenance works are still an issue in production. However, there are sometimes simple solutions which can significantly reduce maintenance time. For this reason, the engineers at DEPRAG SCHULZ GMBH u. CO. developed the BASIC LINE air vane motor, with a particularly attractive price-performance ratio. The one of a kind QuickVChang...

In May 2002 we published our first website, coinciding with AirControl’s 40th anniversary. During all these years, many changes have occurred: Different logo, different company name, different communication ways with customers, moderner manufacturing proccess ... But there is something that has not changed and will not change no matter what happens around us. It is our e...

Alldoo Micropump Co.,Ltd is a leading manufacturer of diaphragm pumps in China, we specialize in the designing and production of various diaphragm micropumps, including micro diaphragm vacuum pumps, gas pumps, water pumps, oil pumps and liquid pumps, and long life time DC brushless motor miniature pumps with variety flow rates, alternative voltage and compact size. R...