After a very good year in 2016, both RHEINTACHO Messtechnik in Freiburg, Germany and RHEINTACHO UK in Leeds, increased their sales by more than 25% in 2017. Several large new contracts and many new developments in sensors enabled to tackle the increasingly difficult international sensor market with great success and also provide a very positive overlook for the future...
DMO series digital scales by WayCon Positionsmesstechnik GmbH are accurate, magnetic length measuring devices. The full enclosure with IP65 rating keeps out dust, chips and water for significantly greater reliability and durability compared to optical measuring systems. Typical applications are metal- and woodworking, for example. The sensor head moves along the mould...
SMC is pleased to introduce in the marketplace a new test equipment, the PRIME-600, with a test current from 5 to 600 A, pure DC, and up to 6 V to work with long test leads. The equipment measures both in static and dynamic terms, very low resistance values from 0.1 micro ohms up to 1 ohm, in an efficient and safe way. The PRIME-600 meets the requirements from all Elect...
HORSHAM, PA – AMETEK Drexelbrook, a world leader in level measurement technology, has expanded its point level offering with a fully certified SIL2 safety point level switch that provides highly reliable overfill protection, specifically designed for applications in which there is a high cost of failure. The Drexelbrook Safety IntelliPoint RF represents a significant ...
Drexelbrook has enhanced its Universal IV™ Density Compensated Water Cut Monitor with updated firmware to allow for up to 10 different density calibration points to reduce recalibration requirements and ensure maximum accuracy load to load. The density or API gravity of crude oil changes due to many factors, including temperature, material changes as well as region o...
SIAP+MICROS is pleased to announce the signing of the contract with Direction of National Meteorology of Ministry of Transportation (Direction De La Meteorologie Nationale – Ministere Des Transports) of the Republic of the Niger. The Government of the Republic of Niger received a grant from the Climate Investment Fund (CIF) administered by the African Development Bank...
Hardness tester MIC 10: The device's manufacturer GE Sensing & Inspection Technologies (Krautkramer) terminated the production at the end of October 2017. For this reason, the wideley-used UCI hardness tester MIC 10 is not available anymore. After the device has not been developped for many years, the manufacturer has now drawn a line. A modern alternative is offered...
The industry’s only true dynamic filtration system for conducting filter cake formation and permeability analysis for drilling fluids optimization The Dynamic High Temperature High Pressure (HTHP) filter press measures filtration volume and cake building properties under varying downhole conditions. A motor driven shaft fitted with propellers turns at varying speeds ins...
API Low Pressure, Low Temperature (LPLT) Filter Presses are the most effective means of determining the filtration properties of drilling muds and cement slurries. Measuring filtration behavior and wall-cake building characteristics of a mud is essential to drilling fluid control and treatment. The characteristics of the filtrate, such as oil, water or emulsion conten...
A new version of the VMU931‘s firmware is now available. You can find the updater on the Downloads page. What’s new in v1.0.1: Fixed Linux compatibility issues that would prevent the user to send commands to the VMU931.
The ash fusibility is one of the vital measurement to test the high temperature characteristic of coal. It is an important indicator of coal, which reflects the dynamic change of mineral matter in boiler. Therefore, testing ash fusion temperatures of coal plays a critical role to ensure the safe and economic operation of boiler in coal-fired power plants. Firstly, ash...
Kyowa Electronic Instruments, based in Chofu-city, Tokyo, Japan, and HBM (Hottinger Baldwin Messtechnik GmbH) with its headquarters in Darmstadt, Germany, have agreed on a strategic sales cooperation. Both companies will offer selected products from the respective partner to extend their own portfolio of precise, high-quality transducers and amplifiers. HBM customers esp...
CHAUVIN ARNOUX is delighted to announce that it signed an agreement to purchase a majority holding in INDATECH at the end of September 2017. This means that INDATECH, a company already acknowledged as one of the leaders in spectroscopic measurement in pharmaceutical, biotech and chemical processes, is now the latest subsidiary of the Group. This subsidiary will boost Ch...
Industry brands was recommended by Shanxi IoT Industry Association, Sensors and IoT Industry Association, China electronics society sensing technology branch, China electronic components association and Sensitive components and sensor branch and so on more than 100 industry, and compared by the scale of enterprises, technological innovation, industry influence three comp...
Curtiss-Wright’s Industrial division has announced the launch of the NRH27C, a non-contact rotary position sensor which is suitable for use on specialty on- and off-highway vehicles utilizing CANbus communications. Developed by Curtiss-Wright’s legacy brand of Penny & Giles, the NRH27C extends the company’s recently-introduced NRH271 and NRH272 family and shares many ...
AAP-300 Heavy Metals Analyzer is composed of main unit, Colorimeter cell components, colorimetric tube components, and it is a small-sized portable fast measuring apparatus, which features fast measuring speed, small in size, light in weight and easy to carry, making the handheld operation convenient. This apparatus can not only be used under the laboratory environment b...
The A4300 VA3 Pro is the newest addition to our range of portable devices for vibration diagnostics. Signal inputs allows to connect two individual acceleration sensors or one Triaxial sensor. Input for speed probe is always ready to trigger your all three channel measurements simultaneously!
MDM490 differential pressure transmitter offers +-05%FS accuracy and 4-20m ADC(2 wire) output signal specification over an operating temperature range of -10℃~80℃.Silicon oil is filled between die and two diaphragms to transfer pressure onto sensing die. This differential pressure transmitter has certified by CE, RoHS and Ex-proof. MDM490 can provide re...
What is PSA Oxygen Concentrator? PSA Oxygen concentrator has been widely used in personal and medical treatment for oxygen supply. It adopts PSA technology to separate the O2 and N2 in air to proceed continuous O2 supply. During the oxygen supply, PSA oxygen concentrator needs oxygen sensor to detect the concentration and flow range. Ultrasonic oxygen sensor has...
New SHIMPO Wheels for Contact Tachometers SHIMPO INSTRUMENTS, A Division of NIDEC-SHIMPO AMERICA CORP., has released its new Contact Adapter Wheels for use with SHIMPO Contact Tachometers. The SHIMPO Cable Wheel is a unique 12” circumference wheel specifically designed to securely contain various sized cables and wires. This enhanced design allows the contact tachomet...
Medical Gas standard USP37 requires a specific, selective and positive identification test using a paramagnetic signal. Regular analysis of medical gas is required to ensure that the oxygen concentration is NLT 99.0% volume. Following the appropriate United States Pharmacopeia standards, in this case specifically USP37, requires an analyzer which uses a paramagnetic base...
HOUSTON, TEXAS (July 5, 2017) – To establish purity and optimize process control in industrial processing applications such as ethylene, natural gas and hydrogen manufacturing, Emerson Automation Solutions today announced the Rosemount™ CT5800 continuous gas analyzer. The CT5800 is the first Quantum Cascade Laser (QCL) analyzer designed for industrial process application...
Lubrication Systems Solutions Specialists English Giordana La CameraThe cart is empty HOMEABOUT DROPSA SOLUTIONS COMPONENT CATALOGUE CONTACT US Search About Dropsa News&Events News FLOWMASTER II ABOUT DROPSA Timeline News&Events News Events RSS Feed Careers FLOWMASTER II Increases the reliability of your lubrication system! The key to an eff...
With the PPCP3 series, Pewatron is launching a new generation of pressure sensors based on the capacitive measuring principle. The capacitive MEMS pressure sensor features an incredibly high resolution (<15 μbar). The PPCP3-M1 is a differential pressure sensor with an SPI or TWI interface. The inside is fitted with a capacitive sensor chip and signal conditioning elec...
Delft, the Netherlands (25 May 2017) – Kipp & Zonen, the world leader in solar radiation measurement, will proudly present a completely new technology and product to monitor PV panel soiling at Intersolar Europe 2017 in Munich. Soiling of the panel glass is one of the major problems in the rapidly expanding solar energy market, with the attendant loss of efficiency an...
NoiseScout is the professional solution for unattended sound level monitoring. Around the clock, all the levels recorded with the XL2 Sound Level Meter are available in real-time on a website for viewing in graphs and for download. Automatic alert emails are sent as soon as a limit is exceeded. The latest NoiseScout feature offers the ability to set individual limits for...
The new R&D building will provide the necessary space for further development of cutting-edge technologies that promises to pave the way for countless industrial applications. SWR engineering Messtechnik GmbH was founded in 1994 in Schliengen, in the south of Germany, being the leading supplier of continuous measurement technology for processed solids across a wide ra...
Hukseflux introduces a new range of heat flux sensors. Their common denominators: thin, flexible and versatile. Their applications? You name it: the FHF series is a general-purpose range of foil heat flux sensors that can be attached to flat and curved surfaces. The first sensor in the range is FHF01, equipped with an integrated temperature sensor and measuring from -40 ...
Applications: REFRACTION SHALLOW REFLECTION SURFACE WAVES (MASW, Re.Mi., Vs30, MAAM, ESAC, etc.) HVSR / VIBRATIONS DOWNHOLE (with 3D borehole geophone Mod.GFA) CROSSHOLE (with 3D borehole geophone Mod.GFA and cross-hole energizer for P/S waves Mod.CHE)
The PO2ES-103P electrochemical sensor is a rugged oxygen gas sensor intended for use in industrial and medical applications. The sensor is lead free and is RoHS conform, which is certainly a benefit for new product developments, but is also an argument for replacement of lead based sensor in old product lines. In typical medical applications, such as respiratory or co...
Berthold proudly presents two new versions of their mold level detector LB 6760 GAMMAcast. As a direct request from several key-customers in the steel industry, we now introduce two shorter versions of the LB 6760 GAMMAcast detector since space typically is a limiting factor in the continuous casting application. Both versions; one with and one without water-cooling, are...
The integration of RG LEDs (GREEN AMBER RED) in MICRA Series displays greatly facilitates the interpretation of the displayed value by making possible for example to indicate the status of the measurement GOOD MEDIUM BAD or to differentiate the measurement type by the color PRESSURE SPEED TEMPERATURE MICRA Series is composed by the following meters: MICRA-M: Proc...
SR30 pyranometer, released by Hukseflux Thermal Sensors in January 2017, is the first pyranometer meeting Class A requirements of the new IEC 61724-1 standard. SR30 measures solar radiation employing a state-of-the-art thermopile sensor with black coated surface and two domes. The outer pyranometer dome is heated by ventilating the area between the inner and outer do...
<p>Thousands of analysts work on daily basis with combustion analyzers, in laboratories all around the world. One of the elements which can be measured by elemental combustion analyzers are Halogens, due to microcoulometric detection technique. This may be Total Halogens, Adsorbable Organic Halogens or Extractable Organic Halogens. Analysis of Halogens by this technique ...
It enables users to visualize gas leaks in real time and can quickly pinpoint the failure. With fully calibrated for temperature measurement applications, as compared to traditional inspection, it also can inspect without interruption of process and reduce inspection time as well as Spot leaks close by or meters away. GL800 features: - 320x240 QWIP cooled detetor ...
A new engineering based on photodiode technology enhances the performances of Elap incremental encoders series REV, granting: - voltage supply range widened to 5/28 Vdc, with 30/65 mA power consumption - 200/400 KHz frequency - number of ppr extended to 50000 Encoders series REV can be supplied with 58-mm diameter round flange (clamping or synchro) or 63.5-mm s...
